Sanyo VPC-HD1A If Turn ON/OFF or Audio Guide is selected, If Shutter or KEY SW is selected

3 Select “CHANGE SETTINGS”, and
		OPERATION BEEP
press the SET button.
h The screen to change the settings	TURN ON/OFF		ON
appears.		SHUTTER	D
		KEY SW	A
4 Toggle the SET button up or down	AUDIO GUIDE		ON
	OPERATION VOL		4
to select the desired setting, and		EXIT
press the SET button.

hThe screen to select operation sounds appears.

<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>

hThe respective screen to enable or disable the sound appears. h Toggle the SET button up or down to select the desired setting,

and press the SET button.

ON: Activates the sound.

OFF: Deactivates the sound.

<If “SHUTTER” or “KEY SW” is selected>

hThe screen to select the operation sounds appears. h Select from 6 different sounds (A to F).

h You can press the still image shooting button to preview the selected operation sound.

h If “OFF” is selected, no sound is produced.

h Toggle the SET button up or down to select the desired setting,

and press the SET button.

<If “OPERATION VOL” was selected>

hThe screen to select the volume for the operation sounds appears. h You can select an operation sound volume from 1 (minimum) to 7

(maximum).

h Toggle the SET button up or down to select the volume, and press the SET button.

5 Select “EXIT”, and press the SET button.

hThe operation sound settings are completed.

HINT

i If you keep the MENU button pressed and turn on the power, the screen to turn the operation sounds ON/OFF appears at once. You may find this a convenient procedure to disable the operation sounds in places you do not want them to be audible.

English 124