Sanyo VPC-HD1A instruction manual Using the Zoom

USING THE ZOOM

Your camera has two zoom functions: optical zoom and digital zoom. You can specify whether or not the digital zoom is enabled (page 130).

1 Point the camera lens at the subject.

2 Press [T] or [W] on the zoom switch to compose the desired image.

[T]: Zoom in on the subject.

[W]: Zoom out.

hWhen the zoom switch is pressed, the zoom bar appears

on the monitor.

hWhen moving the optical zoom,

press the zoom switch lightly to zoom slowly, and press more strongly to zoom quickly.

Zoom switch

hWhen the optical zoom factor is at maximum, zooming stops temporarily. When the zoom switch is pressed toward the [T] side again, the mode changes to the digital zoom mode and zooming continues.

Monitor

When both optical and digital zoom are enabled

Zoom bar

Magnification

Optical zoom

Digital zoom (yellow)

When optical zoom only is enabled

Pointer

3 Take the picture.

For video clip recording, see page 42.

For shooting single shots, see page 46.

For shooting sequential shots, see page 52.

English 60