Sanyo VPC-HD1A instruction manual Troubleshooting

TROUBLESHOOTING

	Problem	Cause	Action	Reference
				page
	When zooming	The optical	Not a
	in or out, the	zoom has	malfunction.
	zoom	moved to the	Release the	60
	movement	maximum	zoom switch,
	stops	magnification	and press it
	momentarily.	position.	again.
Shooting	There is noise	The ISO sensi-	Set the ISO
	in the captured	tivity setting is	sensitivity to a	83
	image.	too high.	lower setting.
	The \ icon	The camera’s	Discontinue
	appears, and	internal	shooting, and
	shooting is not	temperature is	wait for the	—
	possible.	high.	camera to cool
			down before
			using it again.
Monitor	No playback	The main	Set the main
	image	switch is not	switch to PLAY.	43, 48
	appears.	set to PLAY.
	The image is	The flash was	Hold the camera
	too dark.	blocked by a	correctly, and
		finger or other	make sure the	38
		object.	flash is not
			obstructed.
		The subject	Capture the
		was too far	image in the	185
		away.	range of opera-
			tion of the flash.
Viewing		The subject	Use the forced	61
images		was lit from	flash mode.
		behind.	Use the expo-
			sure correction	63
			function.
			Use the spot
			light-measuring	82
			mode.
		There is not	Adjust the ISO
		enough light.	sensitivity	83
			setting.

175English