Sanyo VPC-HD1A Date and time setting, Startup display page 122 h Select the screen display that

1Date and time setting

(page 35)

hSet the camera’s internal clock.

2 Screen display (page 121) h Specify what information is displayed on the Playback

Screen.

3 Startup display (page 122) h Select the screen display that

appears when the camera is turned on.

4 Operation sounds setting (page 123)

h Select the operation sounds that are produced when the camera’s buttons are pressed, and adjust the operation sound volume.

5 Post-view (page 125)

h Specify how long the captured image is displayed on the monitor after the still image shooting button is pressed.

6 Wind noise reduction setting (page 126)

h Set the wind noise reduction function on or off.

7 Noise-reduction (page 127) h Set the noise-reduction function on or off.

8 Image quality adjustment (page 128)

h Adjust the image quality during shooting.

9 Flicker-reduction (page 129) h Set the flicker-reduction

function on or off.

0Digital zoom setting (page 130) h Enable or disable the digital

zoom.

AMonitor brightness (page 131) h Adjust the brightness of the

monitor.

BExternal microphone

(page 132)

hAdjust the input level of a microphone connected to the camera.

CScreen language (page 133) h Select the language in which the monitor messages are

displayed.

DTV output settings (page 134) h Select the type of video signal that is output from the camera’s

USB/AV terminal.

EPower save function (page 139) F File number reset (page 141)

h Select the file number reset function.

G Card format (page 144)

h Use the camera to format the memory card.

H Reset camera settings (page 146)

h Reset the camera to the factory-preset settings.

I Remaining battery power (page 149)

*Icons 7 through H are displayed when you toggle the SET button up or down to scroll.

English 120