PLAYING BACK VIDEO CLIPS AND STILL IMAGES

How to save one frame from a video clip as a still image

1 Play back the video clip. Pause the playback at the point you wish to “snap” a photo.

2 Press the [ ] button.

hThe screen to select the aspect ratio of the still image appears. Select

the desired aspect ratio, and press the [ ] button. Note, however, that if the video clip aspect ratio is 4:3, you cannot select 16:9.

hIt is not possible to save a frame from a video clip that was recorded in the f mode.

HINT

The file for a video clip is very large

i Therefore, be aware that if the video clip is uploaded to a computer to be played back, the computer may not be able to play back the video fast enough, making it appear jerky. (The video will always be displayed properly on the camera monitor or a television.)

i Depending on the card, shooting may end even before the possible shooting time indicated.

Display the video clip playback point

i During video clip playback, press the MENU button for at least 1 second to display a bar showing the current playback point in the video clip.

i Press the MENU button for about 1 second to cancel the bar.

CAUTION

During video clip playback, the sound of a motor is audible...

i During recording, the sound of the optical zoom movement or autofocus movement was recorded. This is not a malfunction.

If no audio is heard...

i The audio is not played back when the video clip is played back in the frame-by-frame, fast playback or reverse playback mode.

87English