PREPARING THE POWER

5 Close the camera’s monitor unit, and set the camera in the docking station.

hSet the camera securely, making sure that the camera is correctly oriented in relation to the terminal contacts in the docking station.

hCharging begins when the camera is set in the docking station.

hDuring charging, the multi- indicator is lit red. When charging is completed, the indicator turns off.

hIf the multi-indicator flashes red, it indicates that the battery pack is defective or the camera is not correctly set in the docking station. Reset the camera correctly in the docking station.

hThe charging time is approx. 200 minutes.

hCharging is executed when the battery temperature is approximately 0 to 35 °C (32 to

95 °F). If the battery temperature exceeds 35 °C (95 °F), the safety mechanism will operate to automatically interrupt charging. The multi-indicator flashes red in this case also. After the battery cools down, charging begins again, and the multi-indicator lights

red.

hThe AC adaptor (supplied) can be connected to the camera’s DC IN terminal to charge the battery.

Multi-indicator

Docking station terminal

35English