PREPARATION OF BATTERIES
Use the supplied (or sold separately) AA nickel metal hydride batteries to power the digital camera. You can also use AA
CAUTION
œManganese batteries cannot be used, as they have an extremely short battery life and may overheat and damage the digital camera.
œFor your safety, read “Concerning the Batteries” on page 5 and “Concerning the Supplied Battery Charger” on page 7 before handling the batteries.
Recharging Nickel Metal Hydride BatteriesMake sure to completely recharge the supplied nickel metal hydride batteries before use. Use only the supplied battery charger to recharge the batteries. This battery charger can be used for both the nickel metal hydride batteries
1 Insert the batteries into the battery charger.
œMake sure the polarity ((+),
2 Insert the power cord into the socket on the battery charger.
3 Plug the power cord into a power outlet (AC 100 to 240V).
œRecharge will start automatically.
œDuring recharge, the recharge indicator on the battery charger will light.
œIf the batteries are completely discharged, the indicator may flash. If the indicator lights up steadily after a few minutes, the batteries are okay.
œWhen the batteries are recharged, the indicator will go off.
Recharge time of the supplied nickel metal hydride batteries: approx. 200 minutes for two batteries.
to AC
Recharge indicator
NOTE
œRecharge time of the
œThe recommended ambient temperature when recharging is between 10°C and 40°C. If the temperature is less than 10°C, the batteries may be unable to be fully recharged.
21English