2 Using the–) button,+ (orselect the desired setting, then press the l button.
Following this procedure, select the settings for DATA and
DISPLAY.

VIDEO LOSS SETTING AND COMPUTER

 

CONTROL SETTING

Menu 8

(VIDEO LOSS SET)

When the live picture signal feed is interrupted, you can set the action taken, and if the video loss is recorded as alarm data. This function will only operate in quad screen display, to select it, set “VIDEO LOSS” to “ON”.

Setting the Video Loss Mode

1 Press the l button to highlight the

DISPLAY

You can set the display mode when there is an interruption in the video signal feed.

FREEZE: When there is video loss, the image just previous to the interruption is frozen on-screen. (Default setting)

TEST:

When there is video loss, colour bars are displayed

 

on-screen.

NOTE: If the (VIDEO LOSS SET) menu, “DISPLAY” is set to setting“FREEZE”to modify, when there. is a loss of the video signal,

“VIDEO LOSS” and the image just previous to the interruption will be shown frozen on screen. To switch to a colour bars display, press the camera select button or QUAD button.

3 ☞✰❒❅▲▲ ▼❈❅l button to go to the next

(RS232C SET)

☞✰❒❅▲▲ ▼❈❅ ✭✥✮✵ ❂◆▼▼❏■ ▼❏ ❇❏ ▼❏ ▼❈❅ ■❅❘▼ ❍❅■◆

 

▲❃❒❅❅■✌ ❏❒

Connect this unit to a computer, using a 9-pin D-SUB cable (sold

☞✰❒❅▲▲ ▼❈❅ ✥✸✩✴ ❂◆▼▼❏■ ▼❏ ❅❘❉▼ ▼❈❅ ❍❅■◆ ❄❉▲❐●❁❙✎separately), then set the maximum communication speed with the computer.

1í62

For detailed information, refer to “RS232C CONTROL” on page

 

 

28.

(VIDEO LOSS SET)

VIDEO LOSS

 

ON

 

DATA

 

ON

 

DISPLAY

FREEZE

LIVE

QUAD

 

 

 

 

 

 

 

 

 

 

✶✩✤✥✯ ✬✯✳✳ ✳✥✴ ❍❅■◆

✶✩✤✥✯ ✬✯✳✳

You can set the action to take when there is an interruption in the video signal feed.

ON: When there is video loss, the image just previous to the interruption is frozen on-screen or colour bars are displayed (see “DISPLAY” right) and “VIDEO LOSS” is displayed on-screen. (Default setting)

OFF: When there is video loss, “NO VIDEO” is displayed on-screen.

NOTE: If no camera is connected to one of the terminals, then “NO VIDEO” will be displayed on a grey screen. This will not trigger a video loss alarm.

Changing the Setting

1 Press the l button to highlight the sett

2Using the–) button,+ (orselect the desired setting.

The available speeds are:

2400, 4800, 9600, 19200 (Default setting) bps

3 ☞✰❒❅▲▲ ▼❈❅ ✭✥✮✵ ❂◆▼▼❏■ ▼❏ ❇❏ ▼❏ ▼❈❅ ■❅❘▼ ❍❅■◆ ▲❃❒❅❅■✌ ❏❒

☞✰❒❅▲▲ ▼❈❅ ✥✸✩✴ ❂◆▼▼❏■ ▼❏ ❅❘❉▼ ▼❈❅ ❍❅■◆ ❄❉▲❐●❁❙✎

1í62

(VIDEO LOSS SET)

VIDEO LOSS

 

ON

 

DATA

 

ON

 

DISPLAY

FREEZE

 

(RS232C SET)

 

DATA SPEED

 

19200

 

LIVE

QUAD

 

 

 

 

 

 

 

 

 

 

 

DATA

You can set the data (date, time, etc) of the video losses to be recorded as alarm data. (To view the recorded data, refer to “ALARM DATA DISPLAY ” on page 26.)

ON: The video losses data is recorded as alarm data. (Default setting)

OFF: The video losses data is not recorded.

English

25