BASIC OPERATIONS

MODE SWITCHING

When the unit is connected to a power source, the default display mode will be: live picture from the four cameras 1 – 4 in a quad screen. You can use the VCR, LIVE and MENU buttons to switch to the desired mode (see below for further information).

LIVE picture mode

VCR playback mode

LIVE picture mode

Menu mode

 

 

 

(LANGUAGE/LANG./SPRACHE)

 

 

 

ENGLISH

 

 

 

FRANCAIS

 

 

 

DEUTSCH

Power on

VCR

LIVE

MENU

 

Live Picture Mode (see page 9)

When the LIVE button is pressed, the live (direct) picture from cameras 1 – 4 connected to the camera input terminals on the unit rear panel, will be displayed. While in live picture mode you can use the still and zoom functions.

NOTE:

The unit will automatically start in the live picture or VCR playback display mode (quad screen or full screen display) last selected. Therefore, when a mode is selected, the display mode will remain the same.

In quad screen mode, if a camera is not connected at one of the input terminals, “NO VIDEO” will be displayed on the monitor screen.

NO

VIDEO

NO

VIDEO

NO

VIDEO

NO

VIDEO

VCR Playback Mode (see page 14)

Start playback on the VCR. If the video signal is correctly recorded, the VCR playback image will be displayed when the VCR button is pressed.

Menu Setting Mode (see page 15)

Press the MENU button to display the menu. The buttons used for menu control are indicated below.

Menu control buttons

 

 

 

 

 

 

ALL6RESET

STILL

ZOOM

SEQUENCE

QUAD

LIVE

VCR

MENU

 

 

 

 

 

 

MENU6RESET

EXIT

NEXT

 

 

 

 

 

1

2

3

4

1 EXIT (STILL) button

To exit the menu mode.

2 NEXT (ZOOM) button

To select a sub-menu in order to set the title position, etc. Press the NEXT button to switch between the menu and the sub-menu.

3+,– (QUAD, SEQUENCE) buttons … Press repeatedly

Use these buttons to select numbers, letters, symbols.

+ button: for forward selection

button: for backward selection

4 c,l (VCR, LIVE)… Pressbuttonrepeatedly

Use these buttons to move the cursor to the right or down.

c button: will move the cursor towards the right.

l button: will move the cursor down.

English

7