Power Connections | Sanyo VSE-2400, VSE-2300 specs

Rear Cap

Remove These

Dome Plugs

1/2-inch Rubber Plugs

Foot

3/8-inch NPT

Fitting

Figure 7: Feed-through Wiring

2.Screw the two 3/8-inch NPT fittings into the foot of the housing.

3.Pull the cabling through the fittings and into the housing. Tighten the fitting to 4.0 N.m to 4.5 N.m (35 in.lb to 40 in.lb). This torque rating is approximately 1 to 1-1/2

turns past the point where the fitting starts to grip the wire. Failure to do so will result in water damage to all electronic parts.

4.Attach the foot to the top bracket of the mount.

5.Cover the holes in the rear cap with the rubber plugs provided. Push in until flush and then release.

6.6.4Power Connections

Power connection into the housings is to be supplied through a minimum type UL Standard "SJ" cord acceptable for outdoor use. Installation must conform to acceptable NEC and local codes. For 24 volt cameras, use the chart below for selecting the proper wire size.

Recommended Maximum Cable Lengths for Housings Equipped with 24 Volt Cameras, Heaters, and Blowers

Wire Size		Housing	Distance
mm2	AWG	meters	feet
0.5	20	28.6	94
1	18	45.7	150
1.5	16	70.1	230
2.5	14	115.5	379
4	12	183.8	603
6	10	292.6	960
10	8	464.2	1523

NOTE: The use of wire sizes larger than 1.5 mm2 (14 AWG) will require a splice in order to accomodate the terminal block.

1.Install one of the large 1/2-inch NPT fittings into one of the holes in the rear cap. The terminal block side is preferable. If you are using the feed-through option, ignore this step.

2.Route the power cable through the fitting in the rear cap or one of the feed-through fittings in the foot.

3.The terminal block provided on /x0 units accepts wire ranging from 20 to 14 AWG or 1.5 mm2. The terminal block provided on /x1 units accepts wire ranging from 18 to 12 AWG or 2.5 mm2. When using larger wire sizes, splice to a smaller size wire at the terminal block end. The splice may need to be enclosed in a junction box if it does not pass through the fittings.

4.A screw/terminal lug is provided for securing a safety ground. To attach the safety grounding wire (green 115 volt, green/yellow 230 volt), first unscrew the terminal lug and strip and crimp the grounding wire into the lug. Attach the terminal lug to the bracket using the M4 x 10 screw provided. See Figure 8.

Figure 8: Power Connections - Nonfan Units

Screw

Terminal	Fuseholder
Terminal
Lug
Ground
Neutral
Line	Terminal Lug
	M4 Nut (Use a
	7 mm wrench)

Figure 9: Power Connections - Fan Units

Ground

Terminal Lug

Neutral

Screw	Line

Fuseholder

5.Pull any excess wire out of the housing and tighten the fitting to 8.5 N.m to 9.0 N.m (75 in.lb to 80 in.lb). This

torque rating is approximately 1 to 1-1/2 turns past the point where the fitting starts to grip the wire.

Failure to do so will allow water to enter and damage all electronic parts.

VSE-2300, VSE-2400 specifications

The Sanyo VSE-2400 and VSE-2300 are modern audio-visual systems known for their exceptional performance and versatility, appealing to both casual listeners and audiophiles alike. These systems integrate advanced technology to enhance sound quality, making them a popular choice for home entertainment.

The VSE-2400 boasts an impressive array of features designed to deliver immersive sound experiences. It is equipped with a powerful digital amplifier that ensures high-fidelity audio reproduction. The unit supports a variety of audio formats and can play CDs, MP3s, and streaming services, making it a versatile option for any music lover. Its sleek design is complemented by a user-friendly interface, allowing users to navigate through their media libraries with ease.

One of the main technologies that sets the Sanyo VSE-2400 apart is its implementation of digital signal processing (DSP). This technology optimizes sound output by automatically adjusting audio settings based on the type of content being played. Whether it's a movie, music, or a podcast, the DSP ensures that users receive the best audio quality tailored to their listening preferences.

The VSE-2300, on the other hand, is slightly more compact yet does not compromise on sound quality. This system is ideal for those with limited space but still want a robust audio solution. Like the VSE-2400, it features a high-efficiency digital amplifier, ensuring clean and powerful sound output without distortion.

Both models include Bluetooth connectivity, allowing users to connect their smartphones or tablets wirelessly for seamless music streaming. Additionally, they come equipped with USB ports and auxiliary inputs, offering flexibility in how users choose to play their audio content.

A common characteristic of the VSE series is their built-in equalizers, enabling users to customize audio settings to better suit their preferences. The systems also include remote control functionality, enhancing convenience for users who wish to operate their audio systems from a distance.

In conclusion, the Sanyo VSE-2400 and VSE-2300 are excellent audio-visual systems that offer a rich set of features and technologies, catering to a diverse range of listening needs. Whether for casual enjoyment or serious listening, these systems provide quality sound and easy connectivity, making them worthy additions to any home entertainment setup.

Sanyo VSE-2400, VSE-2300 instruction manual Power Connections

Models: VSE-2300 VSE-2400