![](/images/new-backgrounds/1108842/10884299x1.webp)
13. Daily Care
Be sure to turn the power off and remove the battery pack before perform- ing the following operations.
Caring for the thermal head
1. Slide the cover release lever to open the cover.
When in dispense mode printing, first slide the dispenser unit to the con- tinuous printing mode position. (See section, Switching from Dispense mode printing to Continuous printing mode, in chapter 4, Preparing for
Thermal head
2.Wipe off any smudges with a cloth dipped in alcohol. Do not use thinner, benzene, or kerosene.
46