Savin 40105 Copying from the Multi Bypass Tray Tray, Set the side fences a to the paper size

Copying from the Multi Bypass Tray (Tray 7)

Copying from the Multi Bypass Tray (Tray 7)

The multi bypass tray (Tray 7) can be used the same way as other trays. Also, thick paper of larger than A4 (81/2" ⋅ 11") size is available.

Note

❒	You cannot use the label paper in the multi bypass tray (Tray 7).
❒ The sizes of paper you can use with the multi bypass tray (Tray 7) are as fol-			2
	lows.
	Metric version	• Vertical: 139 – 305 mm

•Horizontal: 139 – 458 mm

Inch version • Vertical: 5.5" – 12.0"

•Horizontal: 5.5" – 18”

❒The machine can automatically detect the following sizes as standard size copy paper.

Metric version	A3L, B4L, A4LK, B5K, A5KL, 11" ⋅ 17"L, 11" ⋅ 81/2"K, 51/2" ⋅
	81/2"L, 8" ⋅ 13"L
Inch version	A3L, B4L, A4K, B5K, A5L, 11" ⋅ 17"L, 81/2" ⋅ 11"LK, 51/2" ⋅
	81/2"LK, 8" ⋅ 13"L

❒The maximum number of sheets you can load into the bypass tray depends on paper type. The number should not exceed the upper limit.

❒If you want to use a size of paper other than those in the above table, be sure to specify the size. See p.29 “When copying onto regular size paper”.

A Set the side fences (A) to the paper size.

1

2

1

ZJAY040N

B Place paper in the multi bypass tray (Tray 7).

27