
Placing Originals
Placing Originals in the Auto Document Feeder (ADF)
Settings should be made in the following situations:
1 ❖ When placing originals of more than 100 pages:
See p.15 “Batch mode”.
❖When placing originals one by one:
See p.16 “SADF mode”.
❖When copying originals of various sizes:
See p.16 “Mixed size mode”.
❖When copying originals onto thin paper
See p.17 “Thin mode”.
❖When placing custom size originals:
See p.18 “Placing custom size originals”.
Important
❒If you turn on the machine with an original left on the exposure glass and started copying while placing originals in the ADF, a paper jam will occur. Before turning the machine on, check there is no original left on the exposure glass.
Note
❒Do not stack originals over the limit mark on the inner side wall of the ADF.
❒The last page should be on the bottom.
❒To copy thin originals of 40 to 52 g/m2 (35 to 45 kg), two or more originals may be fed at a time, and be damaged. To avoid this, place originals one by one in the ADF, or place an original on the exposure glass.
A Set the document guide to the original size.
B Align the edges of the original and place it in the ADF with the side to be copied facing up.
TJAH050E |
| 1. | Limit mark |
14 | 2. | Document guide |
|
|