Savin 40105, 4090 Directional Size Magnification inch, Adjust the horizontal ratio using n or o

Copy Functions

BAdjust the horizontal ratio using [n] or [o].

Note

❒Pressing [n] or [o] changes the ratio in 1% increments. Pressing and holding down [n] or [o] changes it in 10% increments.

❒If you have entered a ratio incorrectly, readjust using [n] or [o].

CAdjust the vertical ratio using [n] or [o].

C Place originals, and then press the {Start} key. 2

Directional Size Magnification (inch)

Optimal reproduction ratios are automatically selected when you enter the re- quired horizontal and vertical lengths of the original and copy image.

1.Horizontal original size

2.Vertical original size

3.Horizontal copy size

4.Vertical copy size

Note

❒Specify the vertical and horizontal sizes of the original and those of the copy, as shown in the illustration.

❒You can enter sizes within the following ranges.

Metric version	Vertical: 1 – 999 mm (in 1 mm increments)
	Horizontal:	1 – 999 mm (in 1 mm increments)
Inch version	Vertical: 0.1” – 99.9” (in 0.1” increments)
	Horizontal:	0.1” – 99.9” (in 0.1” increments)

A Press [Reduce/Enlarge].

B Press [Dir. Size Mag.”].

41