Installing the Printer Driver
F Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G Click [Next >].
|
|
H Select the machine model you want to use. | 1 |
|
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port.
J Click [Port:], and then click [Add].
K Click [SmartDeviceMonitor], and then click [OK].
L Click [TCP/IP], and then click [Search].
A list of printers using TCP/IP appears.
M Select the printer you want to use, and then click [OK].
N O
Only printers that respond to a broadcast from the computer appear. To use a machine not listed here, click [Specify Address], and then enter the IP address or host name of the machine.
Check that the port of the selected printer is displayed in [Port:].
Set a user code, if necessary.
Up to 8 numeric characters can be entered. No alphabetic character or symbol can be entered.
P Q
Select the [Default Printer] check box to configure the printer as default.
Click [Continue].
Installation starts.
R After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒Setting a user code allows a SmartDeviceMonitor for Admin user to dis- play and check statistics about the number of sheets which each user prints. For details, see SmartDeviceMonitor for Admin Help.
❒Auto Run may not work with certain operating system settings. If this hap- pens, launch “Setup.exe” on the
❒Under Windows 95 / 98 / Me, you cannot add an IP address partially sim- ilar to the one already used. For example, if “192.168.0.2” is in use, “192.168.0.2xx” cannot be used. Similarly, if “192.168.0.20” is in use, “192.168.0.2” cannot be used.
25