Preparing the Machine

 

Windows XP, Windows Server 2003

 

This describes how to install the printer driver to the computer with Windows

1

XP or Windows Server 2003 installed, using IEEE 1394 (SCSI print).

Important

 

❒SCSI print must be set to “active” from the control panel. For details, see Net- work Guide.

❒Installing this printer driver requires Administrators permission. Log on us- ing an account that has Administrators permission.

A Connect the machine to the computer using the IEEE 1394 interface cable.

When the [Found New Hardware Wizard] dialog box appears, check that [This wizard helps you install software for: (Unknown)] is displayed.

B Select the [Install from a list on specific location (Advanced)] check box, and then click [Next >].

C When the message “Please choose your search and installation option.” ap- pears, select the [Search for the best driver in these locations.] check box, select the [Include this location in the search:] check box, and then select the [Include this location in the search:] check box.

D Insert the CD-ROM into the CD-ROM drive.

If Auto Run starts, click [Cancel], and then [Exit].

To disable Auto Run, press the left {Shift} key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

E Specify the location where the source files of the printer driver are stored, and then click [Next >].

If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

•RPCS

D:\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1

•PCL 5c (for color printing) D:\DRIVERS\PCL5C\WIN2K_XP\(Language)\DISK1

•PCL 5e (for B & W printing) D:\DRIVERS\PCL5E\WIN2K_XP\(Language)\DISK1

•PCL 6

D:\DRIVERS\PCL6\WIN2K_XP\(Language)\DISK1

•PostScript 3 (“Scanner Driver and Utilities” CD-ROM) D:\DRIVERS\PS\WIN2K_XP\(Language)\DISK1

When installation is complete, the printer connected to “1394_00n” appears in the [Printers and Faxes] window. (“n” shows the number of printers connected.)

46