Using as a NetWare Print Server / Remote Printer |
| |
H |
|
|
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the |
| |
operating system, printer model, and port. |
| |
I Click [Port:], and then click [Add]. |
| |
1 | ||
J Click [Network Printer], and then click [OK]. |
| |
K |
| |
The created queue is displayed.
L Select the print queue, and then click [OK].
M Check that the port of the selected printer is displayed in [Port:]. N Click [Continue].
The printer driver installation starts.
O Click [Finish] in the [Select Program] dialog box.
P After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Q After restarting the computer, launch the [Printers] window, and then open the printer properties.
Under Windows XP or Windows Server 2003, open the printer properties from the [Printers and Faxes] window.
R On the [Printer Settings] tab, clear the [Form Feed] and [Enable Banner] check boxes.
Under Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0, click the [NetWare setting] tab.
Do not select these check boxes since they are automatically selected by the printer driver. If you select the check boxes, the printer may not print correctly.
S Click [OK] to close the printer properties dialog box.
Note
❒To stop installation of the selected software, click [Cancel] before installa- tion is complete.
❒The protocol is set to inactive as default. Enable it using SmartDeviceMon- itor or Telnet.
35