Savin SDC326 Setting one Original at a Time in the

Setting one Original at a Time in the Document Feeder
19
1
Setting one Original at a Time in the
Document Feeder
If you set one original at a time in the document feeder, the second and subse-
quent originals can be fed and copied automatically without pressing the {Start}
key.
Note
❒Do not press down or hold originals after ins erting them.
❒While originals are fed from the original table to the exposure glass, do not
pull them out.
❒Do not lift the document feeder until the original has been completely fed out.
ACorrect any curl, fold, or crease in the originals before setting them.
BMake sure the Insert Original indicator is lit and the exposure glass is clear
of originals.
CAdjust the guide to the original size.
DSet the original face up into the document feeder until the Insert Original
indicator goes off.
Note
❒If you are copying a stack of originals one sheet at a time and you want to
keep them in order, start with the last page of the originals.
❒The original guide must touch the front side of the original.
EPress the {
{{
{Start}
}}
} key.
TRSR050E
Trsr050e.eps