Basic Procedure
47
2
❒If Duplex copying cannot be done because of paper problems, set paper on
the bypass tray to copy on the front side, and once again copy on the backside.
❒You cannot use this function for OHP transparencies, translucent paper, ad-
hesive labels and postcards.
❒Do not use copy paper that has been already copied onto by other machines.
❒If the copy paper is bent, correct it before setting paper in the bypass tray. If
the bend is not corrected, a paper misfeed might occur.
AOpen the bypass tray.
BInsert the paper into the bypass tray.
Note
❒Make sure the front side (the side that has been copied onto) faces down.
CPress the [Normal] or [Thick] key.
DPress the [K
KK
K/ L
LL
L] key to select paper orientation.
EPress the [Duplex Back] key.
Note
❒To copy onto custom size paper, press the [Custom Size] key and select or
enter the size. For details, ⇒ P.41 “Copying onto custom size paper with the
bypass tray”.
FPress the [OK] key.
GAdjust the paper guides to the paper size.
Note
❒Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or a pa-
per misfeed might occur.
HSet your originals, then press the {
{{
{Start}
}}
} key.
copy21.tif