Flat Panel/CRT Interface

•Watchdog timer: Can generate a system reset, IRQ15, or NMI. Software selectable time-out interval (2 sec. ~ 255 sec., 1 sec./step)

•DMA: 7 DMA channels (8237 equivalent)

•Interrupt: 15 interrupt levels (8259 equivalent)

•Power management: I/O peripheral devices support power saving and doze/stanby/suspend modes. APM 1.2 ocmpliant

•H/W status monitoring: Winbond W83781D H/W status monitoring IC supports power supply voltages, fan speed, and temperatures monitor- ing

•Chipset: C&T 69000

•Display memory: Built-in 2MB SDRAM

•Display type: Supports non-interlaced CRT and LCD (TFT, DSTN, and Mono) displays. Can display both CRT and Flat Panel simultaneously

•Resolution: Up to 1024x768@64K colors

•Chipset: Realtek RTL8139B 100Base-Tx Fast Ethernet controller

•Ethernet interface: Onboard 100Base-Tx RJ-45 connector

•One 32-pin DIP socket supports M-Systems DiskOnChip 2000 series up to 144MB

Chapter 1 General Information 5

SBC comm SBC-770 manual Flat Panel/CRT Interface