Display connectors (CN15, CN6)
The mainboard's PCI SVGA interface can drive conventional CRT displays and is capable of driving a wide range of flat panel displays, including electroluminescent (EL), gas plasma, passive LCD, and active LCD displays. The board has two connectors to support these displays, one for standard CRT VGA monitors and one for flat panel displays.
VGA display connector (CN15)
VGA display connector (CN15)
Pin | Signal |
1 | Red video |
|
|
2 | Green video |
3 | Blue video |
|
|
4 | Not used |
|
|
5 | GND |
|
|
6 | Red return (GND) |
7 | Green return (GND) |
|
|
8 | Blue return (GND) |
|
|
9 | Key (on pin) |
|
|
10 | Sync return (GND) |
|
|
11 | Monitor ID (not used) |
|
|
12 | Monitor ID |
|
|
13 | Horizontal sync |
14 | Vertical sync |
|
|
15 | Not used |
|
|
Chapter 2 Installation 37
