Manuals / Scag Power Equipment / Lawn and Garden / Lawn Mower

Scag Power Equipment SFW36-16BV manual Engaging the Deck Drive Cutter Hillside Operation Blades

Models: SFW36-16BV

1 48
Download 48 pages 25.77 Kb
Page 17
Image 17

Section 4

R

 

 

4.6 ENGAGING THE DECK DRIVE (CUTTER

4.7 HILLSIDE OPERATION

BLADES)

 

1.Set the throttle at about 3/4 speed. Do not attempt to engage the deck drive at high speed as this shortens the electric clutch life — use only moderate engine speed when engaging the deck drive.

2.Engage the deck drive by pulling out on the yellow switch, located on the instrument panel, to the engage position. See Figure 4-2.

PULL UP TO ENGAGE

PUSH DOWN TO DISENGAGE

390S0138

WARNING

DO NOT operate on steep slopes. ALWAYS FOLLOW OSHA APPROVED OPERATION.

1.This mower has been designed for good traction and stability under normal mowing conditions. However, caution must be used when traveling on slopes, especially when the grass is wet. Wet grass reduces traction and steering control.

2.To prevent tipping or loss of control, do not start or stop suddenly, avoid unnecessary turns and travel at reduced speed. If tires lose traction, disengage blades and proceed slowly off the slope.

3.Avoid sudden starts when mowing on slopes.

4.Travel across the slope whenever possible. Never up and down the slope.

5.Keep tires properly inflated.

Figure 4-2. Cutter Engage Switch

- NOTE -

A squealing noise may be heard when engaging or disengaging the deck drive. It is caused by the electric clutch plates meshing as the mower comes up to speed. This is normal.

3.To disengage the deck drive, push the switch in to the disengage position.

4.Always operate the engine at full throttle to properly maintain cutting speed. If the engine starts to lug down, reduce the forward speed and allow the engine to operate at maximum RPM.

4.8 PARKING THE MOWER

1.Park the machine on a flat, level surface only. Do not park the machine on an incline.

2.Disengage the cutter blades.

3.Lock the neutral latches and shift the transmission into the neutral position.

4.Slow the engine to idle speed.

5.Turn the ignition key to the OFF position and remove the key.

13

Page 16 Page 18
Page 17
Image 17
Scag Power Equipment SFW36-16BV manual Engaging the Deck Drive Cutter Hillside Operation Blades, Parking the Mower
Page 16 Page 18

SFW36-16BV specifications

Scag Power Equipment is renowned for its robust and innovative lawn care machinery, with the SFW36-16BV standing out as a prime example of their commitment to quality and performance. This versatile walk-behind mower is designed to make yard maintenance efficient and effective for both residential and commercial users.

One of the main features of the SFW36-16BV is its powerful 16-horsepower Vanguard engine. This reliable engine provides ample power to tackle tough grass and uneven terrain, ensuring a clean and precise cut every time. The engine is also designed for longevity, featuring improved air filtration and easy-access oil drain for hassle-free maintenance.

The mower's 36-inch cutting deck is crafted from durable steel, allowing it to withstand the rigors of regular use in various conditions. The deck height can be easily adjusted, offering a range of cutting options to accommodate different grass types and seasonal growth patterns. This feature makes the SFW36-16BV ideal for homeowners with diverse landscaping needs or lawn care professionals seeking adaptability.

A standout characteristic of the SFW36-16BV is its intuitive operation system. The unit is equipped with a friction disc drive that provides smooth control while navigating tight spaces. Operators appreciate the precise maneuverability, particularly in complex landscapes or crowded yards. The mower's low center of gravity enhances stability, making it easy to handle on slopes and inclines.

Safety is a priority in the design of the SFW36-16BV, which features a comprehensive safety system including a dual-lever operation for instant stopping. This provides peace of mind during operation, especially in busy or populated areas. Additionally, the ergonomic handle offers comfort during extended use, reducing fatigue.

In terms of technology, Scag ensures that the SFW36-16BV is equipped with features that enhance the mowing experience. The easy-to-use height adjustment lever and simple-to-access control panel make this mower user-friendly. This encapsulates Scag's focus on crafting equipment that meets the needs of lawn care professionals as well as amateurs.

Overall, the Scag SFW36-16BV walk-behind mower offers a blend of power, durability, and user-friendly features, making it a reliable choice for those seeking efficient lawn care solutions. Its outstanding engineering and thoughtful design ensure that it stands out in a competitive market, catering to a wide array of mowing demands. Whether for commercial purposes or residential lawns, the SFW36-16BV delivers performance and satisfaction that lawn care enthusiasts can count on.