Section 6

R

ADJUSTMENTS

6.1 DRIVE CONTROL ADJUSTMENTS

1.Adjust the steering control rods so that there is approximately 3/4" clearance from the bottom of the rod to the bottom of the neutral latch slot when in the drive position. See Figure 6-1.

2.Adjust the steering brake rods so that the brakes do not apply until the steering levers are pulled tight to the handles. When the steering levers are locked in the neutral position the machine should move freely.

Neutral

Latch

Neutral Lock

Position

Drive Position

3/4"

Steering

Brake Lever

SC404GB05

Figure 6-1. Steering Control Rod Adjustment

- NOTE -

Operator pressence lever removed for clarity. Never operate equipment with the interlock system disconnected.

6.2Throttle Control and Choke Adjustments

These adjustments must be performed by your Scag dealer to ensure proper and efficient running of the engine. Should either need adjustment, contact your authorized Scag service center.

6.3 BELT ADJUSTMENT

WARNING

Before removing any guards, shut the engine off and remove the ignition key.

All drive belts are spring loaded and self-tensioning, however after the first 2, 4, 8 and 10 hours of operation, the belts should be checked for proper alignment and wear. Thereafter, check the belts after every 40 hours of operation or weekly, whichever occurs first.

6.4 BELT ALIGNMENT

Belt alignment is important for proper performance of your Scag mower. If you experience frequent belt wear or breakage, see your authorized Scag service center for belt adjustment.

6.5 CUTTER DECK ADJUSTMENTS

Cutter deck level, pitch and height are set at the factory. However, if these adjustments should ever need to be made, the following procedures will aid in obtaining the proper cutter deck adjustment.

- NOTE -

Before proceeding with the cutter deck adjustments, be sure that all tires are properly inflated.

Cutter Deck Level

The cutter deck should be level from side-to-side for proper cutting performance. To check for level, be sure that the mower is on a flat, level surface, the tires are properly inflated and the cutter deck is set at the most common cutting height that you will use. On the RH side of the machine, check the distance from the top of the cutter deck to the floor. Next check the distance from the top of the cutter deck to the floor on the LH side of the machine. Both measurements should be the same. If the two measurements are different, the cutter deck level must be adjusted as follows:

19

Page 22 Page 24
Page 23
Image 23
Scag Power Equipment SFW36-16BV Drive Control Adjustments, Belt Adjustment, Belt Alignment, Cutter Deck Adjustments
Page 22 Page 24

SFW36-16BV specifications

Scag Power Equipment is renowned for its robust and innovative lawn care machinery, with the SFW36-16BV standing out as a prime example of their commitment to quality and performance. This versatile walk-behind mower is designed to make yard maintenance efficient and effective for both residential and commercial users.

One of the main features of the SFW36-16BV is its powerful 16-horsepower Vanguard engine. This reliable engine provides ample power to tackle tough grass and uneven terrain, ensuring a clean and precise cut every time. The engine is also designed for longevity, featuring improved air filtration and easy-access oil drain for hassle-free maintenance.

The mower's 36-inch cutting deck is crafted from durable steel, allowing it to withstand the rigors of regular use in various conditions. The deck height can be easily adjusted, offering a range of cutting options to accommodate different grass types and seasonal growth patterns. This feature makes the SFW36-16BV ideal for homeowners with diverse landscaping needs or lawn care professionals seeking adaptability.

A standout characteristic of the SFW36-16BV is its intuitive operation system. The unit is equipped with a friction disc drive that provides smooth control while navigating tight spaces. Operators appreciate the precise maneuverability, particularly in complex landscapes or crowded yards. The mower's low center of gravity enhances stability, making it easy to handle on slopes and inclines.

Safety is a priority in the design of the SFW36-16BV, which features a comprehensive safety system including a dual-lever operation for instant stopping. This provides peace of mind during operation, especially in busy or populated areas. Additionally, the ergonomic handle offers comfort during extended use, reducing fatigue.

In terms of technology, Scag ensures that the SFW36-16BV is equipped with features that enhance the mowing experience. The easy-to-use height adjustment lever and simple-to-access control panel make this mower user-friendly. This encapsulates Scag's focus on crafting equipment that meets the needs of lawn care professionals as well as amateurs.

Overall, the Scag SFW36-16BV walk-behind mower offers a blend of power, durability, and user-friendly features, making it a reliable choice for those seeking efficient lawn care solutions. Its outstanding engineering and thoughtful design ensure that it stands out in a competitive market, catering to a wide array of mowing demands. Whether for commercial purposes or residential lawns, the SFW36-16BV delivers performance and satisfaction that lawn care enthusiasts can count on.
Top Page Image Contents