R

Section 7

sharpened. Remove the blades for sharpening. See "Blade Replacement."

- NOTE -

Keep the blades sharp. Cutting with dull blades not only yields a poor mowing job, but slows the cutting speed of the mower and causes extra wear on the engine and the blade drive by pulling hard.

B. Blade Sharpening

- NOTE -

If possible, use a file to sharpen the blade. Using a wheel grinder may burn the blade.

- NOTE -

DO NOT sharpen the blades beyond 1/3 of the width of the blade. See Figure 7-3.

2.Raise the mower deck to the highest position. Place the lanyard pin in the highest cutting height position to prevent the cutter deck from falling.

3.Secure the cutter blades to prevent them from rotating, (use the optional Blade Buddy tool P/N 9212, to assist in securing the cutter blades), remove the blade attaching bolt. Remove the cutter blade, bolt, lockwasher and flatwasher from the spindle shaft. See Figure 7-4.

- NOTE -

Be sure that the blade is installed with the lift wing towards the top of the cutter deck.

4.Install the cutter blade on to the cutter spindle shaft. Secure the blades from rotating and torque to

75 ft/lbs. See Figure 7-4.

1.Sharpen the cutting edge at the same bevel as the original. See Figure 7-3. Sharpen only the top of the cutting edge to maintain sharpness.

Angle Blade Back

Do Not Cut In

 

X Must NOT Exceed

30

1/3 Blade Width

SGB033

 

CUTTER BLADE

LOCKWASHER

5/8-11 x 1-1/2" HEX HEAD BOLT TORQUE TO 75 FT/LBS

FLATWASHER

Figure 7-3. Blade Sharpening

2.Check the balance of the blade. If the blades are out of balance, vibration and premature wear can occur. See your authorized Scag dealer for blade balancing or special tools, if you choose to balance your own blades.

Figure 7-4. Blade Replacement

7.8 TIRES

Check the tire pressures after every 8 hours of operation or daily.

C. Blade Replacement

WARNING

Always wear proper hand and eye protection when working with cutter blades.

1. Remove the ignition key before replacing the blades.

26

Caster Wheels

25 PSI

Drive Wheels

12 PSI

Page 29 Page 31
Page 30
Image 30
Scag Power Equipment SFW36-16BV manual Tires, Blade Sharpening, Blade Replacement
Page 29 Page 31

SFW36-16BV specifications

Scag Power Equipment is renowned for its robust and innovative lawn care machinery, with the SFW36-16BV standing out as a prime example of their commitment to quality and performance. This versatile walk-behind mower is designed to make yard maintenance efficient and effective for both residential and commercial users.

One of the main features of the SFW36-16BV is its powerful 16-horsepower Vanguard engine. This reliable engine provides ample power to tackle tough grass and uneven terrain, ensuring a clean and precise cut every time. The engine is also designed for longevity, featuring improved air filtration and easy-access oil drain for hassle-free maintenance.

The mower's 36-inch cutting deck is crafted from durable steel, allowing it to withstand the rigors of regular use in various conditions. The deck height can be easily adjusted, offering a range of cutting options to accommodate different grass types and seasonal growth patterns. This feature makes the SFW36-16BV ideal for homeowners with diverse landscaping needs or lawn care professionals seeking adaptability.

A standout characteristic of the SFW36-16BV is its intuitive operation system. The unit is equipped with a friction disc drive that provides smooth control while navigating tight spaces. Operators appreciate the precise maneuverability, particularly in complex landscapes or crowded yards. The mower's low center of gravity enhances stability, making it easy to handle on slopes and inclines.

Safety is a priority in the design of the SFW36-16BV, which features a comprehensive safety system including a dual-lever operation for instant stopping. This provides peace of mind during operation, especially in busy or populated areas. Additionally, the ergonomic handle offers comfort during extended use, reducing fatigue.

In terms of technology, Scag ensures that the SFW36-16BV is equipped with features that enhance the mowing experience. The easy-to-use height adjustment lever and simple-to-access control panel make this mower user-friendly. This encapsulates Scag's focus on crafting equipment that meets the needs of lawn care professionals as well as amateurs.

Overall, the Scag SFW36-16BV walk-behind mower offers a blend of power, durability, and user-friendly features, making it a reliable choice for those seeking efficient lawn care solutions. Its outstanding engineering and thoughtful design ensure that it stands out in a competitive market, catering to a wide array of mowing demands. Whether for commercial purposes or residential lawns, the SFW36-16BV delivers performance and satisfaction that lawn care enthusiasts can count on.
Top Page Image Contents