Scag Power Equipment STC48V-26BS, STC52V-23BV, STC61V-23BV manual Tractor Contd, Cutter Deck

Section 3

3.3 TRACTOR (CONT'D)

Travel Speed:
Forward	0-10 MPH
Reverse	0-5 MPH
3.4 CUTTER DECK

-NOTE-

The machine will travel at 10 mph for transport purposes. For best cutting performance the forward travel speed should be adjusted depending upon the cutting conditions.

Type:	Floating, Adjustable, Anti-scalping, Hybrid Design Combines
	Out-front and Belly-mount Designs
Construction:	Tri-plate deck construction, top of deck consists of three steel
	plates totaling nearly 1/2" of steel.,7-gauge (3/16") deck skirt.
True Cutting Width:	48" (122.0 cm), 52" (132.0 cm), 61" (155.0 cm)
Cutting Height Adjustment:	Foot Operated Lever Adjustment from Operator's Seat, 1.00" to
	5.5" in 1/4"increments
Cutter Blades:	197 Thick, Milled Edge, Wear Resistant Marbain™
Blade Engagement:	Electric Blade Engagement Clutch with Control Panel Switch
	Connected to the Cutter Deck via through a Belt.
Discharge Opening:	Extra Wide Discharge Opening with Spring Loaded Discharge
	Chute and Turbo Baffle
Spindles:	Heavy-duty 1-1/8" Top Dimension Spindle Shaft, Cast Housing,
	Taper Roller Bearing, Low Maintenance with Top Access Grease
	Fitting and Grease Overfill Relief Poppet
Spindle Pulleys:	Split Steel with Easily Removed Taper Hubs
Cutter Deck Belts:	B-section and Cogged Type with Kevlar Cord. Self-adjusting,
	Self-tightening
Electric Clutch Type	Ogura Heavy Duty PTO Clutch Brake

3.6 HYDRAULIC SYSTEM

Hydraulic Oil Filter	10 Micron Spin-on Element Type
Hydraulic Reservoir	Nylon; 2-1/2 Quart Capacity

3.7 PRODUCTIVITY

The following chart will aid you in determining how many acres your Scag mower will cut per day.

The chart is an estimate based on 8 hours per day cutting time at 6 MPH with a 20% allowance for overlap and turns.

Cutting Width:	48"	52"	61"
Acres Per Day:	18.6	20.2	23.7

11