Scag Power Equipment STT-31BSD manual Additional Specifications, Approximate Dimensions

Section 3

SPECIFICATIONS (CON'T)

SCAG “SABRE TOOTH TIGER” ZERO-TURN RIDER

MODEL: STT– 31BSD

CUTTER DECK

Type:	SMST-72A ("Advantage") & SMST-61A ("Advantage") - Floating, adjustable anti-
	scalping, hybrid design combines out-front and belly-mount designs. "Advantage" -
	special extended front edge allows Bahia or other tough grasses to enter the deck
	standing upright for a clean cutting.
Construction:	10-gauge steel top reinforced with 7 gauge support plate, deck skirt is 7 gauge steel
True Cutting Width:	72" cutter deck = 71.5 inches (181.6 cm); 61" cutter deck = 61.0" (155.0cm)
Cutting Height Adjustment:	Foot-operated pedal adjustment from operator’s seat,
	1" to 6" in 1/4" increments
Cutter Blades:	72" = Three (3) 24" blades; 61" = Three (3) 21" blades
Cutter Deck Drive:	Drive shaft to 90 degree gear box
Blade Engagement:	Electric blade engagement clutch with control panel knob
Discharge Opening:	Extra wide 11.5" discharge opening with spring loaded discharge chute
Caster Wheels:	13 x 5 x 6 caster wheels with tapered roller bearing pivots
Spindles:	Heavy duty 1-1/8" top dimension spindle shaft, cast housing, taper roller bearing, low
	maintenance with top access grease fitting and grease overfill relief poppet
Spindle Pulleys:	Split Steel with easily removed taper hubs
Cutter Deck Belts:	B-section with Kevlar cord
Anti-Scalp Rollers:	Two front, two rear 4-1/2" adjustable, two rear 12" fixed

ADDITIONAL SPECIFICATIONS

Seat:	Thick padded seat cushions with special springs. Padded arm rests, lever adjustment
	forward and back.

APPROXIMATE DIMENSIONS
	72"	61"
Length:	92.0"	89.5"
Tracking Width:	56.0”	56.0"
Width:	83.0”	73.0"
Width (with discharge chute up):	73.0”	63.0"
Height:	43.0”	43.0"
Turning Radius:	zero radius turning	zero radious turning
Weight:	1635 lbs.	1600 lbs.

PRODUCTIVITY

The following chart will aid you in determining how many acres your Scag mower will cut per day.

The chart is an estimate based on 8 hours per day cutting time at 7 MPH with an allowance for overlap and turns calculated in.

Cutting Width:	61"	72"
Acres Per Day:	27	32

Date of Issue: October, 2004

Specifications Subject To Change Without Notice

11