Section 7

R

C. Changing Hydraulic Oil Filter Element

The hydraulic oil filter should be changed after every 500 hours of operation or annually, whichever occurs first.

1.Remove the oil filter element and properly discard it. See Figure 7-3. Fill the new filter with clean oil and install the filter. Hand tighten only.

2.Run the engine at idle speed with the speed control lever in neutral for five minutes.

3.Check the oil level in the hydraulic tank. It must be 3-1/4" inches from the top of the filler neck. If necessary, add SAE 20W50 motor oil.

7.4 Engine Oil

ENGINE OIL

DIPSTICk

390S0156

Figure 7-4. Engine Oil Fill/Dipstick Location

A. Checking Engine Crankcase Oil Level

The engine oil level should be checked after every 8 hours of operation or daily as instructed in the Engine Operator’s Manual furnished with this mower.

B. Changing Engine Crankcase Oil

After the first 20 hours of operation, change the engine crankcase oil and replace the oil filter. Thereafter, change the engine crankcase oil after every 100 hours of operation or bi-weekly, whichever occurs first. Refer to the Engine Operator’s Manual furnished with this mower for instructions. See Figure 7-5.

ENGINE OIL FILTER

DRAIN

PLUG

STT99CEC

Figure 7-5. Drain Plug and Oil Filter Location

C. Changing Engine Oil Filter

After the first 20 hours of operation, replace the engine oil filter. Thereafter, replace the oil filter after every 200 hours of operation or every month, whichever occurs first. Refer to Engine Operator’s Manual for instructions. See Figure 7-5.

7.5 Engine Fuel System

DANGER

To avoid injury from burns, allow the mower to cool before removing the fuel tank cap and refueling.

A. Filling the Fuel Tank

Fill the fuel tank at the beginning of each operating day to within one (1) inch below the filler neck. Do not overfill. Use clean, fresh unleaded gasoline with a minimum octane rating of 87 and a maximum of 10% Ethanol.

DO NOT use E85 Fuel. Using E85 Fuel will cause severe damage to the engine.

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

35

Page 38 Page 40
Page 39
Image 39
Scag Power Equipment STT-31EFI-SS operating instructions Engine Oil, Engine Fuel System
Page 38 Page 40

STT-31EFI-SS specifications

Scag Power Equipment is renowned for producing high-quality commercial mowing equipment, and the STT-31EFI-SS stand-on mower is no exception. Designed with professional landscapers in mind, the STT-31EFI-SS offers a perfect blend of power, efficiency, and maneuverability.

One of the standout features of the STT-31EFI-SS is its 31 hp EFI (Electronic Fuel Injection) engine. This powerhouse engine not only delivers impressive power but also enhances fuel efficiency. The EFI technology ensures that the engine operates at optimal performance by automatically adjusting the air-to-fuel ratio under varying conditions. This results in smoother starts, improved throttle response, and reduced emissions, making the mower both environmentally friendly and cost-effective in the long run.

The STT-31EFI-SS features a durable construction built to withstand the rigors of commercial use. Its robust steel frame and heavy-duty components are designed for maximum longevity. Moreover, the mower is equipped with Scag's cutting-edge Hydro-Gear ZT-3400 transmission, which offers exceptional speed and agility. This transmission allows operators to navigate tight spaces with ease and provides a top speed of up to 10.5 mph, making it ideal for large properties or demanding mowing tasks.

Operator comfort is another key aspect of the STT-31EFI-SS. The stand-on design promotes better visibility and quick maneuverability, enabling operators to navigate obstacles with confidence. The padded operator platform and adjustable controls ensure a comfortable experience, even during extended use. Additionally, the mower’s low center of gravity enhances stability on slopes and uneven terrain.

One of the most notable characteristics of the STT-31EFI-SS is its advanced cutting deck. The mower features a 48", 52", or 61" Velocity Plus cutting deck, which is known for delivering a superior cut and impressive grass dispersal. The deck is engineered for optimal airflow, enabling precision mowing while preventing clumping. This technology ensures that grass clippings are evenly distributed, resulting in a healthier lawn appearance.

In conclusion, the Scag STT-31EFI-SS stand-on mower integrates powerful performance, innovative engineering, and comfort. Featuring a reliable EFI engine, robust construction, and exceptional maneuverability, this mower stands out as an excellent choice for professional landscapers seeking efficiency and reliability in their equipment.
Top Page Image Contents