Manuals / Scag Power Equipment / Lawn and Garden / Lawn Mower

Scag Power Equipment STT-31EFI-SS operating instructions Custom-Cut Baffle Adjustment

Models: STT-31EFI-SS

1 116
Download 116 pages 42.95 Kb
Page 32
Image 32

R

Section 6

6.7 Custom-Cut Baffle Adjustment

The Custom-Cut Baffle is designed to deliver optimum airflow and superior cutting performance in any type of grass. The Custom-Cut Baffle can be raised or lowered to precisely tailor the deck's performance for the type of grass being cut. The baffle can be set in three (3) (early models), or seven (7) (current production) different positions for optimum performance.

3-Position Custom-Cut Baffle Adjustment - EARLY MODELS

A.3" Position - (See Figure 6-9). Baffle is installed using the top set of holes on the front baffle welded inside the cutter deck. In this position the Velocity-Plus cutter deck will deliver the best quality-of-cut in very tall, wiry, tough to cut grass.

B.3-1/2" Position - (See Figure 6-9). Baffle is installed using the middle set of holes on the front baffle welded inside the cutter deck. Can be used for general purpose cutting. Placing the Custom-Cut Baffle in the 3-1/2" position gives a good mix of cutting performance in all types of grass.

C.4" Position (factory setting) - (See Figure 6-9). Baffle is installed using the bottom set of holes on the front baffle welded inside the cutter deck. Placing the baffle in the 4" setting will enhance fall cutting (leaf pickup) and reduce cutter deck "blowout".

To adjust the Custom-Cut Baffle height:

1.Place the cutter deck in the transport position.

2.Remove the hardware securing the Custom-Cut Baffle to the cutter deck. See Figure 6-9.

- NOTE -

Hardware location used in the illustrations are for reference only. Location of hardware may vary depending on cutter deck size.

3.Move the Custom-Cut Baffle to desired position. See Figure 6-9.

4.Reinstall the mounting hardware as shown. Torque hardware to 39 lb-ft.

7-Position Custom-Cut Baffle Adjustment - CURRENT PRODUCTION

A.3-1/2" or 3-3/4" Position - (See Figure 6-10). For very tall, wiry or tough-to-cut grass.

B.4" (factory setting), 4-1/4" or 4-1/2" Position - (See Figure 6-10). For general purpose cutting. This gives the best mix of cutting performance in all types of grass.

C.4-3/4" or 5-1/4" Position - (See Figure 6-10). Placing the baffle in either the 4-3/4" or 5-1/4" setting will enhance fall cutting (leaf pickup) and reduce cutter deck "blowout".

To adjust the Custom-Cut Baffle height:

1.Place the cutter deck in the transport position.

2.Remove the hardware securing the Custom-Cut Baffle to the cutter deck.

- NOTE -

Hardware location used in the illustrations are for reference only. Location of hardware may vary depending on cutter deck size.

3.Move the Custom-Cut Baffle to desired position. See Figure 6-10.

4.Reinstall the mounting hardware. Torque hardware to 39 lb-ft.

28

Page 31 Page 33
Page 32
Image 32
Scag Power Equipment STT-31EFI-SS operating instructions Position Custom-Cut Baffle Adjustment Early Models
Page 31 Page 33

STT-31EFI-SS specifications

Scag Power Equipment is renowned for producing high-quality commercial mowing equipment, and the STT-31EFI-SS stand-on mower is no exception. Designed with professional landscapers in mind, the STT-31EFI-SS offers a perfect blend of power, efficiency, and maneuverability.

One of the standout features of the STT-31EFI-SS is its 31 hp EFI (Electronic Fuel Injection) engine. This powerhouse engine not only delivers impressive power but also enhances fuel efficiency. The EFI technology ensures that the engine operates at optimal performance by automatically adjusting the air-to-fuel ratio under varying conditions. This results in smoother starts, improved throttle response, and reduced emissions, making the mower both environmentally friendly and cost-effective in the long run.

The STT-31EFI-SS features a durable construction built to withstand the rigors of commercial use. Its robust steel frame and heavy-duty components are designed for maximum longevity. Moreover, the mower is equipped with Scag's cutting-edge Hydro-Gear ZT-3400 transmission, which offers exceptional speed and agility. This transmission allows operators to navigate tight spaces with ease and provides a top speed of up to 10.5 mph, making it ideal for large properties or demanding mowing tasks.

Operator comfort is another key aspect of the STT-31EFI-SS. The stand-on design promotes better visibility and quick maneuverability, enabling operators to navigate obstacles with confidence. The padded operator platform and adjustable controls ensure a comfortable experience, even during extended use. Additionally, the mower’s low center of gravity enhances stability on slopes and uneven terrain.

One of the most notable characteristics of the STT-31EFI-SS is its advanced cutting deck. The mower features a 48", 52", or 61" Velocity Plus cutting deck, which is known for delivering a superior cut and impressive grass dispersal. The deck is engineered for optimal airflow, enabling precision mowing while preventing clumping. This technology ensures that grass clippings are evenly distributed, resulting in a healthier lawn appearance.

In conclusion, the Scag STT-31EFI-SS stand-on mower integrates powerful performance, innovative engineering, and comfort. Featuring a reliable EFI engine, robust construction, and exceptional maneuverability, this mower stands out as an excellent choice for professional landscapers seeking efficiency and reliability in their equipment.