R

Section 2

2.6Maintenance Considerations & Storage

1.Never make adjustments to the machine with the engine running unless specifically instructed to do so. If the engine is running, keep hands, feet, and clothing away from moving parts.

2.Disengage drives, lower implement, set parking brake, stop engine and remove key or disconnect spark plug wire to prevent accidental starting of the engine when servicing or adjusting the machine. Wait for all movement to stop before adjusting, cleaning or repairing.

3.Disconnect battery or remove spark plug wire before making any repairs. Disconnect the negative terminal first and the positive last. Reconnect the positive first and the negative last.

4.Keep all nuts, bolts and screws tight, to ensure the machine is in safe working condition. Check blade mounting bolts frequently to be sure they are tight.

5.Do not change the engine governor settings or overspeed the engine. See the engine operator's manual for information on engine settings.

6.To reduce fire hazard, keep the cutting units, drives, muffler and engine free of grass, leaves, excessive grease, oil and dirt.

7.Park the machine on level ground and engage the parking brake.

8.NEVER allow untrained personnel to service the machine.

9.Use care when checking blades. Use a Blade Buddy, wrap the blade(s) or wear gloves and USE CAUTION when servicing blades. Only replace blades. NEVER straighten or weld blades.

10.Keep all parts in good working condition. Replace all worn or damaged decals.

11.Use jack stands to support components when required.

12.Carefully release pressure from components with stored energy.

WARNING

Hydraulic fluid is under high pressure. Keep body and hands away from pinholes or nozzles that eject hydraulic fluid under high pressure. If you need service on your hydraulic system, please see your authorized Scag dealer. If hydraulic fluid is injected into the skin, it must be surgically removed within a few hours by a doctor or gangrene may result.

13.Let the engine cool before storing.

14.DO NOT store the machine near an open flame.

15.Shut off fuel while storing or transporting.

16.DO NOT store fuel near flames or drain indoors.

17.Charge batteries in an open, well ventilated area, away from spark and flames. Unplug charger before connecting or disconnecting from battery. Wear protective clothing and use insulated tools.

2.7 Using a spark arrestor

The engine in this machine is not equipped with a spark arrestor muffler. It is in violation of California Public Resource Code Section 4442 to use or operate this engine on or near any forest covered, brush covered or grass covered land unless the exhaust system is equipped with a spark arrestor meeting any applicable local or state laws. Other states or federal areas may have similar laws. Check with your state or local authorities for regulations pertaining to these requirements.

8

Page 11 Page 13
Page 12
Image 12
Scag Power Equipment STT-31EFI-SS operating instructions Maintenance Considerations & Storage, Using a spark arrestor
Page 11 Page 13

STT-31EFI-SS specifications

Scag Power Equipment is renowned for producing high-quality commercial mowing equipment, and the STT-31EFI-SS stand-on mower is no exception. Designed with professional landscapers in mind, the STT-31EFI-SS offers a perfect blend of power, efficiency, and maneuverability.

One of the standout features of the STT-31EFI-SS is its 31 hp EFI (Electronic Fuel Injection) engine. This powerhouse engine not only delivers impressive power but also enhances fuel efficiency. The EFI technology ensures that the engine operates at optimal performance by automatically adjusting the air-to-fuel ratio under varying conditions. This results in smoother starts, improved throttle response, and reduced emissions, making the mower both environmentally friendly and cost-effective in the long run.

The STT-31EFI-SS features a durable construction built to withstand the rigors of commercial use. Its robust steel frame and heavy-duty components are designed for maximum longevity. Moreover, the mower is equipped with Scag's cutting-edge Hydro-Gear ZT-3400 transmission, which offers exceptional speed and agility. This transmission allows operators to navigate tight spaces with ease and provides a top speed of up to 10.5 mph, making it ideal for large properties or demanding mowing tasks.

Operator comfort is another key aspect of the STT-31EFI-SS. The stand-on design promotes better visibility and quick maneuverability, enabling operators to navigate obstacles with confidence. The padded operator platform and adjustable controls ensure a comfortable experience, even during extended use. Additionally, the mower’s low center of gravity enhances stability on slopes and uneven terrain.

One of the most notable characteristics of the STT-31EFI-SS is its advanced cutting deck. The mower features a 48", 52", or 61" Velocity Plus cutting deck, which is known for delivering a superior cut and impressive grass dispersal. The deck is engineered for optimal airflow, enabling precision mowing while preventing clumping. This technology ensures that grass clippings are evenly distributed, resulting in a healthier lawn appearance.

In conclusion, the Scag STT-31EFI-SS stand-on mower integrates powerful performance, innovative engineering, and comfort. Featuring a reliable EFI engine, robust construction, and exceptional maneuverability, this mower stands out as an excellent choice for professional landscapers seeking efficiency and reliability in their equipment.
Top Page Image Contents