R

Section 4

4.7 Hillside Operation

WARNING

DO NOT operate on steep slopes.To check a slope, attempt to back up it (with the cutter deck down). If the machine can back up the slope without the wheels slipping, reduce speed and use extreme caution. Under no circumstances should the machine be operated on slopes greater than 15 degrees. ALWAYS FOLLOW OSHA APPROVED OPERATION.

1.This mower has been designed for good traction and stability under normal mowing conditions. However, caution must be used when traveling on slopes, especially when the grass is wet. Wet grass reduces traction and steering control. The Roll-Over Protection System is standard equipment for this machine. See Section 2.5, page 6 of this manual for further details.

2.To prevent tipping or loss of control, do not start or stop suddenly, avoid unnecessary turns and travel at reduced speed. If tires lose traction, disengage blades and proceed slowly off the slope.

3.Avoid sudden starts when mowing uphill. Sudden starts may cause the machine to tip backwards.

4.Loss of traction may occur when traveling down hill. Weight transfers to the front of the machine and may cause the drive wheels to slip causing loss of braking or steering.

5.Keep tires properly inflated.

4.8 Parking The Mower

1.Park the machine on a flat, level surface only. Do not park the machine on an incline.

2.Place the steering control levers in the neutral position.

3.Disengage the cutter blades.

4.Slow the engine to idle speed.

5.Engage the parking brake.

6.Turn the ignition key to the OFF position and remove the key.

4.9 After Operation

1.Wash the entire mower after each use. Do not use high pressure spray or direct the spray onto electrical components.

- IMPORTANT -

Do not wash a hot or running engine. Cold water will damage the engine. Use compressed air to clean the engine if it is hot.

2.Keep the entire mower clean to inhibit serious heat damage to the engine or hydraulic oil circuit.

3.Check the drive belts for proper alignment and any signs of wear. Correct and adjust if necessary.

Danger

To avoid injury from burns, allow the mower to cool before removing the fuel tank cap and refueling.

4.After the mower has cooled down, fill the fuel tank with fresh, clean fuel with a minimum cetane rating of 40 at the end of every day of operation.

5.Check the tire pressure. Adjust pressure if necessary.

4.10 Removing Clogged Material

Danger

ROTATING BLADES

NEVER PUTYOUR HANDS INTOTHE DISCHARGE CHUTE FOR ANY REASON!

Shut off the engine and remove the key and only then use a stick or similar object to remove material if clogging has occurred.

1.If the discharge chute becomes clogged, shut off the engine and remove the ignition key. Using a stick or similar item, dislodge the clogged material. Then resume normal mowing.

16

Page 19 Page 21
Page 20
Image 20
Scag Power Equipment STT61V-25KBD-SS Hillside Operation, Parking The Mower, After Operation, Removing Clogged Material
Page 19 Page 21

STT61V-25KBD-SS specifications

Scag Power Equipment has long been recognized for its durable, high-performance lawn care machines, and the STT61V-25KBD-SS is no exception. This commercial-grade lawn mower is designed to meet the demanding needs of professional landscapers and homeowners alike, offering unmatched efficiency, comfort, and cutting quality.

At the heart of the STT61V-25KBD-SS is a robust 25 horsepower Kawasaki engine, known for its reliability and outstanding power delivery. This powerhouse enables the mower to navigate through tough grass and varied terrains seamlessly, ensuring that no job is too big or challenging. The engine’s performance is complemented by a hydrostatic drive system, which provides smooth and responsive operation without the need for gear shifting, allowing operators to focus on their mowing task without interruption.

One of the standout features of the STT61V-25KBD-SS is its 61-inch Velocity Plus cutting deck. This innovative deck design promotes superior airflow, resulting in an exceptional cut quality and a clean discharge of clippings. The three-blade system allows for versatile cutting options, making it suitable for both residential lawns and commercial properties. Users will appreciate the adjustable cutting height, which offers a range between 1 inch and 4.5 inches to accommodate various grass types and conditions.

In addition to its cutting prowess, the STT61V-25KBD-SS prioritizes operator comfort and convenience. It features a comfortable seat with cushioning and armrests, providing support during long hours of operation. The ergonomic controls ensure easy maneuverability, allowing operators to navigate efficiently around obstacles.

Durability is another hallmark of Scag Power Equipment, and the STT61V-25KBD-SS is no exception. Its heavy-duty steel frame and components are engineered to withstand the rigors of commercial use, ensuring longevity and reliability. The mower's easy-to-access maintenance points simplify routine servicing, further enhancing its practicality.

Overall, the Scag Power Equipment STT61V-25KBD-SS is a powerful, versatile, and durable mower that stands out in the commercial lawn care market. With its impressive engine, advanced cutting deck technology, and operator-focused design, it represents an excellent investment for anyone serious about maintaining pristine lawns. Whether for professional landscaping or personal use, this mower delivers exceptional results time and time again.
Top Page Image Contents