R

Section 7

B. Charging the Battery

7.8 Drive Belts

Refer to the battery charger’s manual for specific instructions.

Under normal conditions the engine’s alternator will have no problem keeping a charge on the battery. If the battery has been completely discharged for a long period of time, the alternator may not be able to recharge the battery, and a battery charger will be required.

DO NOT charge a frozen battery. It may explode and cause injury. Let the battery warm before attaching a charger.

Whenever possible, remove the battery from the mower before charging and make sure the electrolyte covers the plates in all cells.

WARNING

BATTERIES PRODUCE EXPLOSIVE GASES. Charge the battery in a well ventilated space so gases produced while charging can dissipate.

Charging rates between 3 and 50 amperes are satisfactory if excessive gassing or spewing of electrolyte does not occur or the battery does not feel excessively hot (over 125°F). If spewing or gassing occurs or the temperature exceeds 125°F, the charging rate must be reduced or temporarily stopped to permit cooling.

All drive belts are spring loaded and self-tensioning, however after the first 2, 4, 8 and 10 hours of operation, the belts should be checked for proper alignment and wear. Thereafter, check the belts after every 40 hours of operation or weekly, whichever occurs first.

- NOTE -

If you experience frequent belt wear or breakage, see your authorized Scag service center for belt adjustment.

7.9 Cutter Blades

A. Blade Inspection

1.Remove the ignition key before servicing the blades.

2.Raise the mower deck to the highest position. Place the lanyard pin in the highest cutting height position to prevent the cutter deck from falling.

WARNING

Always wear proper hand and eye protection when working with cutter blades.

3.Check the cutter blades for straightness. If the cutter blades appear bent, they will need to be replaced.

C. Jump Starting

1.The booster battery must be a 12 volt type. If a vehicle is used for jump starting, it must have a negative ground system.

2.When connecting the jumper cables, connect the positive cable to the positive battery post, then connect the negative cable to the negative battery post.

WARNING

Do not attempt to straighten a bent blade, and never weld a broken or cracked blade. Always replace it with a new blade to assure safety.

4.If a blade cutting edge is dull or nicked, it should be sharpened. Remove the blades for sharpening. See "Blade Replacement."

- NOTE -

Keep the blades sharp. Cutting with dull blades not only yields a poor mowing job, but slows the cutting speed of the mower and causes extra wear on the engine and the blade drive by pulling hard.

36

Page 39 Page 41
Page 40
Image 40
Scag Power Equipment STT61V-25KBD-SS Drive Belts, Cutter Blades, Charging the Battery, Blade Inspection, Jump Starting
Page 39 Page 41

STT61V-25KBD-SS specifications

Scag Power Equipment has long been recognized for its durable, high-performance lawn care machines, and the STT61V-25KBD-SS is no exception. This commercial-grade lawn mower is designed to meet the demanding needs of professional landscapers and homeowners alike, offering unmatched efficiency, comfort, and cutting quality.

At the heart of the STT61V-25KBD-SS is a robust 25 horsepower Kawasaki engine, known for its reliability and outstanding power delivery. This powerhouse enables the mower to navigate through tough grass and varied terrains seamlessly, ensuring that no job is too big or challenging. The engine’s performance is complemented by a hydrostatic drive system, which provides smooth and responsive operation without the need for gear shifting, allowing operators to focus on their mowing task without interruption.

One of the standout features of the STT61V-25KBD-SS is its 61-inch Velocity Plus cutting deck. This innovative deck design promotes superior airflow, resulting in an exceptional cut quality and a clean discharge of clippings. The three-blade system allows for versatile cutting options, making it suitable for both residential lawns and commercial properties. Users will appreciate the adjustable cutting height, which offers a range between 1 inch and 4.5 inches to accommodate various grass types and conditions.

In addition to its cutting prowess, the STT61V-25KBD-SS prioritizes operator comfort and convenience. It features a comfortable seat with cushioning and armrests, providing support during long hours of operation. The ergonomic controls ensure easy maneuverability, allowing operators to navigate efficiently around obstacles.

Durability is another hallmark of Scag Power Equipment, and the STT61V-25KBD-SS is no exception. Its heavy-duty steel frame and components are engineered to withstand the rigors of commercial use, ensuring longevity and reliability. The mower's easy-to-access maintenance points simplify routine servicing, further enhancing its practicality.

Overall, the Scag Power Equipment STT61V-25KBD-SS is a powerful, versatile, and durable mower that stands out in the commercial lawn care market. With its impressive engine, advanced cutting deck technology, and operator-focused design, it represents an excellent investment for anyone serious about maintaining pristine lawns. Whether for professional landscaping or personal use, this mower delivers exceptional results time and time again.
Top Page Image Contents