Installing the Driver & Software
6
7
Choose Standard and then click Next. The installation will continue.
When this screen appears, connect the USB interface cable to your PC, and then connect it to the machine.
Improper Setup
DO NOT try to cancel any of the screens during this installation.
9 Click Finish to restart your computer. (After restarting the computer, you must be logged on with Administrator rights.)
Note
After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown. If the Installation Diagnostics shows a failure, please follow the
The
Improper Setup
DO NOT connect the machine to a USB port on a keyboard or a
8 Plug the AC power cord into an AC outlet. Turn the power switch on.
The installation of the drivers will automatically start. The installation screens appear one after another, please wait for a while.
29