Scanport 1200SF Symbols for the main power switch

If moving your machine, use the handholds provided. First making sure to disconnect any cables.

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, keep these bags away from babies and children.

Note

The fuser unit is marked with a caution label. DO NOT remove or damage the label.

Caution

Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

Symbols for the main power switch

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

-

-

means POWER ON.

means POWER OFF.

Note

When you move the machine, grasp the side handholds that are under the scanner. Do NOT carry the machine by holding it at the bottom.

4

Contents

Page 1Symbols used in this guide Safety Precautions Getting Started STEP 1 – Setting Up the Machine Supplied CD-ROM STEP 2 – Installing the Driver & Software To use the machine safely Page Symbols for the main power switch Important safety instructions Regulations Important Information for Australia Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only Federal Communications Commission (FCC) Declaration of Conformity (USA only) Industry Canada Compliance Statement (Canada only) EQUIPMENT ATTACHMENT LIMITATIONS (Canada only) RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL Disconnect device Laser safety FDA regulations 1Carton components for EU 2Carton components for USA, Canada and Asia/Oceania 3Control panel (For EU model) 4Control panel (For USA, Canada and Asia/Oceania model) 1 Installing the drum unit and into the machine. toner cartridge assembly 2Loading paper in the paper tray 3Install the power cord and phone line Page 4Set Your Country 5Selecting your language (For EU, USA, Canada and Asia) 6Setting the date and time 7Setting your station ID 8Tone and pulse dialling mode 9Selecting a receive mode 10Setting the phone line type (For EU model) 11Setting up the prefix number 12Changing the prefix number 13Setting the LCD contrast 1Supplied CD-ROMsfor ‘SP 1200SF’ Page Page 1Installing the TYPE 1200SF Drivers and Utilities Page 1Installing ScanSoft™ PaperPort™ 11SE for Windows® 1View and Installing the documentation 1Consumables Trademarks