AUTO ADJUST
This function auto adjusts the clock and phase of the monitor when using VGA cable so the monitor will sync better with the video card and produce a clearer picture.
1.To use this function press the button labeled .
2.You can also use this function by pressing MENU, then pressing ►.
Please Note :
•This function is only available under VGA.
BRIGHTNESS
This function adjusts the brightness and backlight of the LCD.
1.To use this function, press MENU to open the OSD then highlight BRIGHTNESS function by pressing the ▼ button.
2.Press MENU to enter the function.
3.Press ▲ or ▼ button to select BRIGHTNESS or BACKLIGHT to adjust.
4.Press MENU to select the option you want to adjust.
5.Use the ◄ or ► button to adjust the values.
SCEPTRE X23 | Page25 |