Problems | Solutions |
TV CHANNELS ARE | Check your auto lock function’s settings inside the OSD. You |
BLOCKED | may have locked up some channels but forgot about them. |
UNIVERSAL | This TV follows SONY’s universal remote code. Please check |
REMOTE CODE | your hand book for SONY’s codes then apply them. |
THE TV TURNS ON | This TV is a High Definition liquid crystal display panel TV. It |
OR OFF SLOWLY | requires a few more seconds than normal TVs to power up and |
AND THE SCREEN | show the picture. |
SHOWS UP |
|
SLOWLY |
|
NO SOUND ON PC | Make sure you have a 3.5 mm |
| your pc’s sound output to the TV’s VGA STEREO INPUT. |
HDCP VIDEO SAYS | Reboot your HDCP video device but turning them off and |
NO HDCP SUPPORT | unplugging the power cord. Wait up to 8 minutes to plug the |
| power back in to see if it works or not. |
| Make sure you have a 3.5 mm |
HDCP VIDEO HAS | your HDCP video device’s sound output to the TV’s VGA |
NO AUDIO | STEREO INPUT. If your HDCP video device uses RCA AUDIO |
| jacks, you’ll need to obtain a RCA audio converted into 3.5 mm |
| |
CANNOT GET | Make sure the TV is recognized as plug and play monitor. Try |
1920X1080 ON PC | updating your video card’s drivers as well. If that does not help, |
VGA | most likely you’ll need to upgrade your video card to a newer |
| one. |
PICTURE IS | This might be from interference from large electrical appliances, |
DISTORTED OR | cars, motorcycles, or fluorescent lights. If the TV is close to the |
HAS ABNORMAL | wall, try moving the TV to another room in your house to see if |
SOUND | the problem still occurs. |
| If you’re using HDMI or a TV digital channel make sure you use |
| the ASPECT button to switch to 16:9 format. If you are using |
PICTURE DOES | VGA, use the AUTO ADJUST function to adjust to the screen. |
Please Note : If you are using regular analog TV, AV, or | |
NOT COVER THE | component in 480i resolution, use the ASPECT button to switch |
ENTIRE SCREEN | to 16:9 in order to fill up the screen. Please Note : This note |
| this feature will distort the picture. |
| For best image quality, view HD widescreen programs where |
PICTURE QUALITY | possible. If HD content is not available view “Standard |
Definition” from a digital source. Standard, analog TV will | |
IS HORRIBLE!! | always be noticeable inferior to HD because your X46 LCD |
| HDTV has video that is many times better than old TV’s and so |
| you can see interference and deficiencies you did not KNOW |
| you had. |
PICTURE HAS | Your X46 LCD HDTV is manufactured using an extremely high |
PIXELS THAT ARE | level of precision technology, however, sometimes some pixels |
ALWAYS | of your X46 LCD HDTV may not display. Pixels defects within |
DISPLAYING THE | industry specifications are inherent to this type of product and |
SAME COLOR | do not constitute a defective product. |
I CANNOT CHANGE | Your X46 LCD HDTV syncs time automatically according to |
THE TIME | your local TV channel. This function only works while the TV’s |
MANUALLY | tuner is connected to an ANTENNA. |
BIG BLACK BOX IN | You have turned on closed captioning and are using TEXT1 – |
THE MIDDLE OF | TEXT4. Change the setting to CC1 or turn off closed captioning |
SCREEN | and the box will disappear. |
- 46 -
www.SCEPTRE.com
SCEPTRE X46 HDTV User Manual
