Connecting Cable or Satellite boxes with HDMI…

1.Make sure the power of X46 LCD HDTV and your set-top box is turned off.

2.Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port on the back of your X46 LCD HDTV.

3.Turn on the X46 LCD HDTV and your set-top box.

4.Use the remote control’s source button or the source button on the TV to switch to HDMI.

Please Note :

•Please reference the set-top box’s manual, to make sure the set-top box is configured to output correctly to the TV.

•Sceptre’s X46 LCD HDTV supports SONY’s universal remote code. Please look up SONY’s codes in your universal remote’s hand book.

1.Make sure the power of X46 LCD HDTV and your PC is turned off.

2.Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your X46 LCD HDTV.

3.Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA Stereo Input port.

- 22 -

www.SCEPTRE.com

SCEPTRE X46 HDTV User Manual

Sceptre Technologies X46 user manual Connecting Cable or Satellite boxes with HDMI…