Sceptre Technologies X46 user manual Rear View Connections, Please Note

Rear View Connections

The following descriptions are for connections from left to right.

1.USB – This port is used for firmware upgrades and also for browsing pictures or playing MP3 files if you have a USB flash drive.

2.HDMI1 ~ 4 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

3.VGA - This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you want sound out of VGA video source.

4.VGA STEREO INPUT - This connection port is for people who want to provide audio to the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio cable.

5.YPbPr1 – This connection port is for DVD players or satellite / cable set-top boxes that use component cables. From left to right, connect green, blue, and red for video, and then connect white for left channel audio, and red for right channel audio.

6.YPbPr2 – This connection port is for DVD players or satellite / cable set-top boxes that use component cables. From left to right, connect green, blue, and red for video, and then connect white for left channel audio, and red for right channel audio.

7.SPDIF OUT - This connection port is used for sending out digital audio signals to digital surround sound receivers. The black (OPTICAL SPDIF OUT) connector cover needs to be pulled out and the port sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital input.

8.Headphone – This connection is used for connecting a headphone to the TV.

9.TV – This connection is for digital or analog cable without the cable box or over-the- airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For over-the airwave digital stations please check http://www.antennaweb.org.

10.AC IN - This connection is for providing power to the TV.

Please Note:

•This TV features a power saving function which will turn off the TV automatically after 5 minutes of idling on a connection with no signal. This feature is present on all connection.

- 13 -

www.SCEPTRE.com

SCEPTRE X46 HDTV User Manual