Schlage 70A manual Terms & Conditions Hardware Finishes, Finish Codes and Descriptions

TERMS & CONDITIONS • Hardware Finishes

Hardware Finishes:

Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel or other materials. Where required, a protective clear coating is applied and cured under high temperature. It is important that climatic conditions and usage be taken under consideration when selecting finishes. This is especially true in areas subjected to strong corrosive vapors, humid climate or sea air which, in a short time, may have a damaging effect on metal finishes. The longevity and preservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organic finishing applications may require different methods of cleaning and care. As an example, non-clear coated finishes should not be cleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive soap and buffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaning or preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware.

In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal of finishing process. A, AL, D, ND, F, FA, H, S, S200-Series and Dexter by Schlage levers are zinc-based material and are plated to match finishes indicated. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish numbers in the 600-Series are the BHMA (Builders Hardware Manufacturers Association) industry standard.

Finish Codes and Descriptions:

The nearest old U.S. equivalent code designations are shown in parenthesis ( ).

Symbol		Description	Symbol		Description
505		Bright Brass	620	(15A)	ANTIQUE PEWTER, Satin Nickel Plated, Blackened,
605	(3)	BRIGHT BRASS, Clear Coated			Satin Relieved, Clear Coated
606	(4)	SATIN BRASS, Clear Coated	622		MATTE BLACK, Coated
609	(5)	ANTIQUE BRASS, Satin Brass, Blackened,	625	(26)	BRIGHT CHROMIUM PLATED, No Coating
610		Satin Relieved, Clear Coated	626	(26D)	SATIN CHROMIUM PLATED, No Coating
	(7)	BRIGHT BRASS, Blackened,	629	(32)	BRIGHT STAINLESS STEEL, No Coating
611		Bright Relieved, Clear Coated	630	(32D)	SATIN STAINLESS STEEL, No Coating
	(9)	BRIGHT BRONZE, Clear Coated	716		AGED BRONZE, Clear Coated
612	(10)	SATIN BRONZE, Clear Coated
613* (10B)		OIL RUBBED BRONZE, Oxidized Satin
616		Bronze, Oil Rubbed, No Coating
	(11)	ANTIQUE BRONZE, Satin Bronze, Blackened,
619		Satin Relieved, Clear Coated
	(15)	SATIN NICKEL, Satin Nickel Plated,

Clear Coated

*Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.

Standard Finishes:

Refer to each lock series section for standard finish availability. Standard finish availability varies depending on the function, design and options ordered. Reference Non-Standard Finishes in each lock series section for availability of additional non-standard finishes.

Non-Standard Finishes:

Refer to Non-Standard Finishes in each lock series section for non-standard finish availability. One $250.00 net non-standard finish handling charge applies to each non-standard finish per order. The Schlage Lock Company reserves the right to refuse any order for non-standard finishes without incurring any obligation. If the specific finish you require is not available as a standard or non-standard finish, refer to the Custom Product Request Process on page iv.

Terms-16 Price Book 70A

Effective July 28, 2008