Schneider Electric EM4800 - page 18

PowerLogicTM EM4800 Series 930-112-01-B.00
PowerLogic configuration tool 01/2011
© 2011 Schneider Electric All Rights Reserved12
Report Parameters
The Report section in the main configuration window has three tabs:
• the Period tab allows the user to configure when the reports are
generated and the interval at which data is collected. Figure 7 shows
the Period tab, and Table 3 lists the configuration parameters within the
tab.
• the Types tab allows the user to configure the types of reports that are
generated, and to define the metering parameters that are to be logged
on an interval basis. Figure 8 shows the Types tab, and Table 4 lists the
configuration parameters within the tab.
• the Real Time Interval tab allows the user to configure real time
reporting daily, or at a specified regular interval in minutes. It allows the
user to define how often the meter is to send interval data to a server.
This setting works independently from the Period tab setting. Figure 9
shows the Real Time Interval tab, and Table 5 lists the configuration
parameters within the tab.
• the Power Factor tab allows the user to configure the type of power
factor calculation and the display format for leading vs. lagging power
factor. Figure 10 shows the Power Factor tab, and Table 6 lists the
configuration parameters within the tab.
• the BACnet tab allows the user to configure the BACnet Device ID.
Figure 11 shows the BACnet tab, and Table 7 lists the configuration
parameters within the tab.