B.

PERSONAL PRECAUTIONS AND SAFETY

1.WARNING: Wear complete eye protection and clothing pro- tection, when working with lead-acid batteries.

2.Make sure someone is within range of your voice or close enough to come to your aid when you work with or near a lead-acid battery.

3.Have plenty of fresh water and soap nearby for use if bat- tery acid contacts skin, clothing, or eyes. If battery acid contacts skin or clothing, wash immediately with soap and water.

4.Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your eyes! If acid enters your eye, immediately flood eye with running cold water for at least 10 minutes. Get medical attention immediately.

5.Remove all personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. A lead-acid battery can produce a short-circuit cur- rent high enough to weld a ring (or the like) to metal, caus- ing a severe burn.

6.Take care not to drop a metal tool or other metal onto the battery. Metal may cause sparking or short circuit the bat- tery or another electrical devise. Sparking may cause an explosion.

7.Always operate battery charger in an open well ventilated area.

8.NEVER smoke or allow a spark or flame in the vicinity of the battery or engine. Batteries generate explosive gases!

C.GROUND AND AC POWER CORD CONNECTIONS

Charger should be grounded to reduce the risk of electric shock. Charger is equipped with an electric cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. This battery charger is designed for use on a nominal 120 volt circuit and has a grounded plug that looks like the plug illustrated in FIG- URE 1 (A). This plug should be used in a grounded outlet. The plug pins must fit the receptacle (outlet).

ADAPTER: A temporary adapter, as shown in FIGURE 1 (B) and (C), may be used to connect the charger plug to a two pole receptacle (outlet), as shown in FIGURE 1 (B).

NOTE: The temporary adapter should be used only until a prop-

FIGURE 1: GROUNDING METHODS

erly grounded outlet can be installed by a qualified electrician.

 

DANGER: Never alter the AC cord or plug provided. If it will not fit outlet, have a proper outlet installed by a qualified electrician.

Improper connection can result in a risk of an electrical shock. DANGER: Before using an adapter, as illustrated, be certain that the center screw of the outlet plate is grounded. The green-colored rigid ear or lug extending from the adapter must be connected to a properly grounded outlet. Make certain it is grounded. If necessary, replace original outlet cover plate screw with a longer screw that will secure adapter ear or lug to outlet cover plate and make ground connection to grounded outlet.

"Use of adapter plug not allowed in Canada"

D.

PREPARING TO CHARGE

1.Check your vehicle’s battery voltage and select battery charger switch accordingly.

2.Clean battery terminals. Take care to keep corrosion from coming in contact with your eyes.

3.If required, add distilled water in each cell until battery acid reaches levels specified by battery manufacturer. This helps purge excessive gas from cells. Do not overfill. For a bat- tery without cell caps, carefully follow manufacturer's re- charging instructions.

4.Study all battery manufacturer's specific precautions, such as removing or not removing cell caps while charging, and recommended rates of charge.

5.Be sure area around battery is well ventilated while battery is being charged. Gas can be forcefully blown away by us- ing a piece of cardboard or other non-metallic material as a fan.

6.If necessary to remove battery from vehicle to charge, al- ways remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.

7.A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use.

E.

CHARGE LOCATION PRECAUTIONS

Never place charger directly above the battery being charged; gases from battery could damage the charger.

Never allow battery acid to drip on the charger when reading specific gravity or filling battery.

Never operate charger in a closed in area, or restricted ventila- tion in any way.

Do not set battery on top of the charger.

2

Page 1 Page 3
Page 2
Image 2
Schumacher PS-2352, PS-3000 Ground and AC Power Cord Connections, Personal Precautions and Safety, Preparing to Charge
Page 1 Page 3

PS-8050, PS-5250, PS-2352, PS-3000 specifications

The Schumacher PS series stands out in the automotive equipment market, particularly for its advanced battery chargers and maintainers. Four notable models in this range are the PS-3000, PS-2352, PS-5250, and PS-8050, each offering distinct features and technologies tailored for a variety of user needs.

The Schumacher PS-3000 is designed for versatility and performance. It incorporates smart sensing technology that automatically detects voltage and adjusts the amperage to optimize charging. This model boasts a 3-amp automatic charger with a digital display that provides charging status and indicates the condition of the battery. Its compact design makes it highly portable, ideal for both home use and emergency situations.

Next, the PS-2352 model elevates functionality further. It's a fully automatic battery charger and maintainer specifically designed for both 6V and 12V lead-acid batteries. The PS-2352 utilizes microprocessor control to ensure precision in every charge cycle, which helps extend battery life. Moreover, it features an easy-to-read LED display that communicates battery status and charging progress, while its built-in safety protections guard against overcharging and reverse polarity.

The Schumacher PS-5250 model caters to higher capacity demands with its robust 6/12V charging capabilities. This model delivers a maximum of 5 amps of charging power and has a unique fast-charge feature for quickly restoring battery life. Its advanced float mode monitoring ensures that batteries remain charged without the risk of overcharge. The PS-5250's construction is durable and built to withstand the rigors of both professional and home use.

Lastly, the PS-8050 is the top of the line for heavy-duty applications. With a charging capability of up to 50 amps, this model is perfect for larger vehicles and industrial batteries. It features an onboard microprocessor for intelligent charging, which regulates the output to suit different battery types. Additionally, the PS-8050 is equipped with multiple safety features, including short-circuit protection and over-temperature prevention, ensuring safe usage even in demanding environments.

In summary, the Schumacher PS series effectively combines cutting-edge technology with user-friendly features across its lineup. From compact solutions like the PS-3000 to heavy-duty options such as the PS-8050, each model is designed to meet specific user requirements while ensuring the longevity and reliability of batteries. These models illustrate Schumacher's commitment to quality and innovation in automotive care.
Top Page Image Contents