10.4Mount the Axle to the Charger: Place one end of each bracket into the slot on the bottom of the charger. Place the axle assembly under each bracket. Attach the brackets using the two,
NOTE: Be careful not to drop the brackets inside of the charger case.
10.5Attach the Handle: Turn the charger right side up onto its foot and wheels. Remove the two top screws from each side of the charger. Insert the fiberglass clip rod into the pierced holes on the inside of the handle.
Align the handle so the screw holes are aligned with the screw holes on each side of the charger. Attach the handle using the same screws you previously removed.
10.6Charger assembly is now complete. Battery clips can be clamped to the fiberglass rod for convenient storage.
• 8 •
