OPERATING INSTRUCTIONS

IMPORTANT: Follow all safety instructions and precautions when charging your battery. Wear complete eye protection and clothing protection. Charge your battery in a well-ventilated area.

CHARGING BATTERY IN THE VEHICLE:

1.Avoid personal injury by keeping clear of fan blades, belts, pulleys and other engine parts.

2.Avoid damaging the charger by keeping the power cord and output cords away from the hood, door or moving engine parts.

3.Note the polarity of the battery posts by checking the identification marks on the battery: POSITIVE (POS, P or +) and NEGATIVE (NEG, N or -). The positive post is usually larger than the negative post.

4.Identify which battery post is grounded or connected to the chassis. THIS IS NORMALLY THE NEGATIVE POST.

NEGATIVE GROUNDED SYSTEM

5.Connecting to a negative- grounded system: Connect the red (POSITIVE) output clamp to the POSITIVE post of the battery. Rock and twist the clamp back and forth to be sure a solid electrical connection is made. Then connect the black (NEGATIVE) output clamp to a

heavy, unpainted metal part of the chassis or engine block, away from the battery (see figure above). DO NOT connect clamp to negative battery post, carburetor, and fuel line or sheet metal part.

Connecting to a positive-grounded system: Connect the black (NEGA- TIVE) output clamp to the NEGA- TIVE post of the battery. Rock and twist the clamp back and forth to be sure a solid electrical connection is made. Then connect the red (POSI- TIVE) output clamp to a heavy, unpainted metal part of the chassis or engine block, away from the battery. DO NOT connect clamp to positive battery post, carburetor, and fuel line or sheet metal part.

6.Plug power cord into an AC outlet. The charger will be set to the Tester Mode for REGULAR battery type.

7.Press the appropriate control buttons to select the desired charge rate and battery type. The CHARGING (yellow) LED should light and the charging process should start. If the CHECK (red) LED is on, check for correct cable connections.

8.To disconnect the charger, unplug its power cord before attempting to disconnect the output clamps. Then, standing away from the battery, remove the output clamp from the chassis or engine block. Finally, remove the output clamp from the battery post.

9.Clean and store the charger in a dry location.

6

Page 5 Page 7
Page 6
Image 6
Schumacher SSF-1000A owner manual Operating Instructions, Charging Battery in the Vehicle, Negative Grounded System
Page 5 Page 7

SSF-1000A specifications

The Schumacher SSF-1000A is a state-of-the-art electric scooter designed for riders seeking a combination of power, efficiency, and modern technology. This innovative model showcases a sleek design, highlighting its user-friendly features and advanced engineering.

One of the standout aspects of the SSF-1000A is its powerful 1000W motor, which provides impressive acceleration and a top speed of up to 28 mph. This makes it an ideal choice for both urban commuting and recreational riding. The scooter’s robust performance is complemented by its high-capacity lithium-ion battery that offers a range of up to 40 miles on a single charge, allowing users to travel longer distances without the need for frequent recharging.

The SSF-1000A is equipped with a dual braking system, combining both electronic and mechanical brakes for enhanced safety and reliability. This braking system ensures smooth stopping power, providing riders with peace of mind, especially when navigating busy streets or steep inclines. The scooter also features front and rear LED lights, enhancing visibility during nighttime rides.

In terms of comfort, the SSF-1000A boasts an adjustable suspension system that absorbs bumps and uneven terrain, making it easier to ride over various surfaces. The wide, anti-slip deck offers ample foot space, promoting stability and balance, which is especially beneficial for newer riders. The scooter also comes with a lightweight aluminum frame, making it easy to carry and store.

One of the most notable technological advancements in the SSF-1000A is its smart display panel, which provides real-time information including speed, battery level, and distance traveled. This intuitive interface allows riders to monitor their performance at a glance. Additionally, the scooter supports Bluetooth connectivity, enabling users to pair their smartphones and access navigation features and ride statistics through a dedicated app.

The Schumacher SSF-1000A is not just about performance; it also reflects a commitment to sustainability. Its electric nature means zero emissions, making it an environmentally friendly alternative to traditional gasoline-powered vehicles. Overall, the SSF-1000A combines practicality, cutting-edge technology, and eco-friendly design, making it a top contender in the electric scooter market. Whether for daily commutes or leisure rides, this scooter stands out as a reliable and efficient choice for modern riders.
Top Page Image Contents