(4) Computer Screws (item #3)
Step 13: Before sliding the HANDLEBAR POST (#4) onto the MAIN UNIT (#13), attach both HR CABLES (#7 & #10) as well as the COMPUTER CABLE (#8 & #9). Slide the HANDLEBAR POST (#4) onto the MAIN UNIT (#13). Fasten with 4 BOLTS (#22) and 4 CURVED WASHERS (#19). Tighten with provided Allen wrench.
Step 14: Attach UPPER COMPUTER CABLE (#7) and HR CABLE (#8) to under side of COMPUTER (#1). Place COMPUTER (#1) on top of HANDLEBAR ASSEMBLY (#2), the reading rack should wrap around the bottom of the COMPUTER (#1). Attach COMPUTER (#1) to HANDLEBAR ASSEMBLY (#2) with COMPUTER MOUNTING SCREWS (#3). (In computer back) Tighten with Phillips head screwdriver.
Step 15: Plug AC ADAPTOR (#71) into the wall and into the recumbent bike. The POWER PLUG (#72) on the bike is located at the front end of the MAIN UNIT (#13) just above the FRONT STABILIZER TUBE (#11)
Seat Adjustment
For best results, the seat should be adjusted for your height.
1.Unlock “seat locking” mechanism.
2.Adjust seat location so that with feet on the pedals, you can comfortably reach pedal at full extension.
That’s it!
You’re finished and now you can begin to reach your fitness goals!
Please reference the Owner’s Manual for information regarding computer operation, product maintenance, warranty information, and general fitness and exercise guidelines.
Schwinn Customer Service 1.800.864.1270
