Assembly Stage #3

Attach Front Stabilizer Tube and Pedals to Main Unit

Assembly Hardware Required:

(2) Flat Head Screws (item #12)

Step 8: Attach FRONT STABILIZER TUBE (#11) to the MAIN UNIT (#13) with 2 FLAT HEAD SCREWS (#12). Tighten Bolts with provided wrench.

Step 9: Attach RIGHT PEDAL (#14) to the right crank arm on the MAIN UNIT (#31). Thread the pedal onto the crank arm and then tighten with pedal wrench. Attach LEFT PEDAL (#14) to the left crank arm on the MAIN UNIT (#13). Thread the pedal onto the crank arm and then tighten with pedal wrench. Note: There is a right pedal and a left pedal, marked by R and L. The threading on the left pedal is reversed from the right pedal. Counterclockwise rotation tightens while Clockwise rotation loosens on the left pedal. To avoid stripping of the threads be careful to use the proper pedal.

Attach PEDAL STRAPS (#18) to each PEDAL (#14). Again, each strap is labeled with an R or an L corresponding to the right and left pedal straps.

Page 11
Image 11
Schwinn 212 manual Assembly Stage #3, Attach Front Stabilizer Tube and Pedals to Main Unit