Schwinn 212 manual Instructions, Assembly Stage #1, Screws M4x14L item #29

Instructions

IMPORTANT!: To ensure ease of assembly please verify the size and quantity of all the required assembly hardware and parts with the enclosed parts list and full size hardware chart.

Each step of the assembly process has been broken down into 6 easy-to-follow stages. Please take just a few moments to read over these instructions to familiarize yourself with the process to make assembly quick and trouble-free.

Assembly Stage #1

Assemble Seat and Handle Bar

Assembly hardware required:	(8)	M8 Allen Bolts 45 mm long (item	#25)
	(4)	M8 Allen Bolts 16 mm long (item	#5)
	(12) Flat Washer Ø8* Ø 16*2T(item #15)
	(8)	Screws M4x14L (item #29)

Step 1: Attach HANDLEBAR ASSEMBLY (#20) to SEAT FRAME (#26) with the 4 ALLEN BOLTS 16mm (#5) and 4 FLAT WASHERS (#15). Tighten bolts with the provided Allen wrench.

Step 2: Attach the right and left WATER BOTTLE HOLDERS (#28) with the SCREWS (#29) to the underside of the SEAT BOTTOM (#23) using the provided screwdriver.