Schwinn A10 Reset, Or check batteries Batteries, Check for blockage of fan, Post adjustment holes

Fan (if equipped) will not turn on or will not turn off	Check data cable integrity	All wires in cable should be intact. If any are cut or
		crimped, replace cable.
	Check data cable connections/orientation	Insure cable is connected securely and oriented
		properly. Small latch on connector should line up and
		snap into place.
	Reset Machine (if equipped with reset button)	Unplug unit from electrical outlet for 3 minutes.
		Reconnect to outlet. After Console powers up, press
		"reset".
	If bike has batteries, check Battery Indicator on console	If the battery level shows low or no power, replace
	or check batteries.	the batteries.
Fan (if equipped) will not turn on, but Console operates	Check for blockage of fan	Turn power off (remove batteries or unplug power
		adapter). Remove material from fan. If necessary,
		detach the Console to help with removal. Replace the
		Console if unable to remove blockage.
Unit rocks/does not sit level	Check leveler adjustment	Leveling feet may be turned to level bike.
	Check surface under unit	Adjustment may not be able to compensate for
		extremely uneven surfaces. Move bike to level area.
Pedals loose/unit difficult to pedal	Check pedal to crank connection	Pedal should be tightened securely to crank. Insure
		connection is not cross-threaded.
	Check crank to axle connection	Crank should be tightened securely to axle. Be sure
		cranks are connected at 180 degrees from each other.
Seat post movement	Check locking pin	Insure adjustment pin is locked into one of the seat
		post adjustment holes.
	Check adjustment knob	Insure knob is securely tightened.

15