Leveling Your Bike
The levelers are the polygonal end caps on the Rear Stabilizer. Turn the end cap to adjust the level. Make sure the bike is level and stable before you exercise.
Moving Your Bike
Upright
To move the upright bike, carefully pull the Handlebars toward you while pushing the front of the bike downward. Push the bike to the desired location.
Recumbent
To move the recumbent bike, carefully lift the rear end of the bike and slowly push the bike to the desired location.
NOTICE:Be careful when you move the bike. All abrupt motions can affect the computer operation.
Troubleshooting
Problem | Check | Solution |
|
|
|
No display/partial display/unit will not turn on | If bike has AC adapter, check electrical (wall) outlet | Make sure unit is plugged into a functioning wall |
|
| outlet. |
|
|
|
| If bike has AC adapter, check connection at unit | Connection should be secure and undamaged. Replace |
|
| adapter or connection at unit if either are damaged. |
|
|
|
| If bike has batteries, check Battery Indicator on console | Replace the batteries. It may be necessary to replace |
| or check batteries. | the batteries although the Battery Indicator is not on. |
|
|
|
| Check data cable integrity | All wires in cable should be intact. If any are visibly |
|
| crimped or cut, replace cable. |
|
|
|
| Check data cable connections/orientation | Make sure cable is connected securely and oriented |
|
| properly. Small latch on connector should line up and |
|
| snap into place. |
|
|
|
| Check console display for damage | Check for visual sign that console display is cracked or |
|
| otherwise damaged. Replace Console if damaged. |
|
|
|
13
