Scientific Atlanta 15-100 manual Setting the Language, Setting the Clock

SETTING THE LANGUAGE

Before using your RadioShack 8-in-1 LCD Remote, you must set the default language (either English or Spanish). You cannot use your remote control until you have set the language. To set the language for your remote control for the first time, perform the following steps:

1.After the remote powers up, the LCD displays

English OK or .

2. Press OK for English or press until Spanish is displayed. Press OK.

3.The LCD displays Success and returns to normal

operation.

To change the language after the initial setup, perform the following steps:

1.Press and hold P until the LCD displays

Code Set OK or . The remote is now in the programming mode.

2. Use the or keys to scroll through the LCD display until Language is displayed.

3.Press OK once.

4.To set the language to English, press OK once. To set

the language to Spanish, use the to scroll to Spanish. Press OK to select Spanish as the remote

control’s language.

5.To exit this menu, press EXIT once, or use the key to return to the previous menu.

SETTING THE CLOCK

To set the clock on your remote control, perform the following steps:

1.Press and hold P until the LCD displays

Code Set OK or . The remote is now in the programming mode.

2. Use the or keys to scroll through the LCD until Clock set is displayed.

3.Press OK once.

4.The LCD displays the time as previously set, if any. The first set is the hour. The second set is the

minutes. In the position following the numbers, the LCD displays A or P for A.M. or P.M.

5.While the number for the first digit is flashing, use

	the or	keys to select the correct digit. You can
	also change the time by pressing the number keys
	on your remote control’s keypad.
6.	Use the	key to change to the next digit, until the
	last digit is set. Use to go back to the previous
	digit.
7.	After you have set the correct time, use the key to
	cursor over to A or P.

10