Scientific Atlanta 15-100 manual Programming a Learned Key, Deleting a Single Learning Key

•For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning.

Programming a Learned Key

1.Press and hold P until the LCD displays

	Code Set OK or	. Use the
	keys to scroll through the LCD display
	until Learn is displayed. Press OK.
2.	The LCD displays Add Learn OK or . Press OK.
3.	The LCD displays Press Mode or .

4.Press a mode key once (i.e., TV, VCR , PVR, CBL/SAT, CD, DVD, AUX, or AUDIO) to assign a mode to learn onto.

5.Place the RadioShack 8-in-1 LCD Remote head-to- head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the RadioShack 8- in-1 LCD Remote to learn.

2"

6.Press the key on your RadioShack 8-in-1 LCD Remote that wish to assign learning.

7.On the original remote, press and hold the key. Continue holding the key on the original remote

until the RadioShack 8-in-1 LCD Remote’s LCD displays either Success or Learn Fail.

NOTE: Immediately after you have pressed the key

that will learn, the LED flashes rapidly and the LCD displays Learning. The remote times

out after five seconds and returns to step 6.

8.Repeat steps 4 through 7 for another mode and/or key or press EXIT to exit programming. Repeat steps 5 through 7 if learning failed.

Deleting a Single Learning Key

This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see “Programming a Learned Key” on page 17).

1.Press and hold P until the LCD displays

Code Set OK or		. Use the
keys to scroll through the LCD display
until Learn is displayed. Press OK.
2. Use the	keys to scroll through the

LCD display until Dlt Learn is displayed. Press OK.

17