WebSTAR Cable Modem Front Panel
POWER
PC
DATA CABLE
Front Panel Indicators
|
| 1 | POWER | Illuminates solid green to indicate that power is being applied to the cable |
|
|
|
|
| modem |
|
|
| 2 | PC | Illuminates solid green to indicate that an Ethernet/USB carrier is |
|
|
|
|
| present |
|
|
|
|
| Blinks to indicate that Ethernet/USB data is being transferred between |
|
|
|
|
| the PC and the cable modem |
|
|
| 3 | DATA | Blinks to indicate that data is being transferred between the modem and |
|
|
|
|
| the cable network |
|
| 1 | 4 | CABLE | Illuminates solid green when the modem is registered on the network and |
|
|
|
| fully operational. This indicator blinks to indicate one of the following |
| |
| 2 |
|
|
| |
|
|
| conditions: |
| |
| 3 |
|
|
| |
|
|
| • The cable modem is booting up and not ready for data |
| |
|
|
|
| ||
| 4 |
|
|
| |
|
|
| • The cable modem is scanning the network and attempting to register |
| |
|
|
|
|
| |
|
|
|
| • The cable modem has lost registration on the network and will continue |
|
|
|
|
| blinking until it registers again |
|
|
|
|
| • Blinks very slowly (once every 5 seconds) to indicate that Cable Modem |
|
|
|
|
| Access Protection is enabled |
|
|
|
|
| Note: Once the cable modem is successfully registered on the network, the |
|
|
|
|
| POWER and CABLE indicators illuminate continuously to indicate that the |
|
|
|
|
| cable modem is active and fully operational. |
|
T9916 |
|
| See Detailed Front Panel Indicator Functions later in this guide for more |
| |
|
|
|
| information on front panel indicator functions. | 9 |
